Shenzhen MaoTeWang Electronic Technology Co., Ltd.

Product introduction

Model Explanation

Technical Parameter

Technical Specification

Control Characteristics	Control mode	synchronous motor control without encoder /asynchronous motor control without encoder	synchronous motor control with an encoder/asynchronous motor control with an encoder
	Startup torque	0.2% rated speed on motor, 180% rated torque	0speed,180% rated torque
	Range of speed regulation	1:200	1:1000
	Precision of steady speed	± 0.5%	± 0.02%
Product Functions	Key functions	undervoltage regulation, speed tracking, torque limitation, multi-stage speed, motor self-learning, weak magnetic control, current limitation.
	Designated speed mode	RS485, keyboard, terminal, analog quantity, multi-stage speed, simple PLC, PID, pulse frequency.
	Braking capacity on Power Consumption	400V drive：brake unit voltage：650～750V.
	Dual 485 communication ports	Dual 485 communication interface supports Modbus protocol (RTU); standard operation panel meet remote control , up to 500 meters.
	Common DC bus	The whole series meet common DC bus power supply for multiple drives.
	Independent air duct	The whole series uses independent air duct design,and support radiator cabinet with installed outdoors.
Protect Function	undervoltage, overcurrent protection, over-voltage protection, abnormal comparison level, self-learning to identify fault, protection of the module, radiator overheating protection, overload protection on drive, overload protection on motor, peripheral protection, current detection, the output of a short circuit, abnormal operation of the power,abnormal input power, EEPROM anomaly, relay and abnormal disconnection, analog input, temperature sampling disconnection, encoder, an abnormal motor overheating (PTC), communications, hardware, overload protection.
Efficiency	Rated power: 7.5kW and lower power grade≥93%；11kW to 15kW≥95%.
Environment	Operating site	The product should be mounted vertically in the electric control cabinet with good ventilation.Horizontal or other installation modes are not allowed.it is air cooling.
	Ambient temperature	-10 to +40℃, the product must be de-rated output current for the ambient temperature between 40℃ to 50℃, the rated output current must be de-rated for 1% per 1℃ temperature rise .
	Humidity	5～95%, no condensing.
	Altitude	0～2000m, the product must be de-rated rated output current for the altitude above 1000 meters, the rated output current must be de-rated for 1% per 100 meters rise.
	Vibration	3.5 m/s²，2～9Hz；10 m/s²，9～200Hz；15 m/s²，200～500Hz.
	Storage temperature	−40～+70℃

Installation Dimension

Download

undefined

TS−I Series High Performance Synchronous Servo Drive for Injection Molding Machine

Product Model：

TS - I series is a special synchronous servo drive with high performance, high reliability and high speed response for injection molding machine, shoe machine, hydraulic machinery oil-electric hybrid system. The product is a flexible and diverse digital control module based on DSP, a high-performance digital signal processor. According to the control algorithm and software of various servo motors, high performance vector control, accurate position and speed control, high speed control with nonlinear weak magnetic and vector control with low speed under position corrected space are realized. At the same time, to meet the requirements of high-speed and high-precision servo control, the built-in automatic anti-disturbance control and control algorithm on speed observation are combined with feed forward compensation control and command smoothing technology. these have better dynamic tracking and steady-state performance, and truly realize high response, high precision and high reliability on servo. According to characteristics of hydraulic machinery, the PQ control algorithm is fully decoupled, which improves response speed, and facilitate mutual conversion between smooth moving speed and pressure control on hydraulic machinery.

Categories：

Products

Industrial Automation

Special-purpose VFD

Plastic & Metal Processing Special VFD

Keywords：

Download File：

overseas@v-t.com

E-mail

+86 13077877280