en
ru
es
ar
On November 17, the Baoan Daily of Shenzhen Press Group published the article "High Performance of V&T Electric Vehicle Motor Controller", introducing the V&T high-performance E-drive e-mobility motor controller to Shenzhen residents. ⬛ For Shenzhen V&T Technologies Co.,Ltd.( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it was successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-doctoral innovation practice base. With two R & D centers in Shenzhen city and Wuxi city, It is based on independent technology research development and product innovation, keeping up with the world's advanced level. The main drive motor controller, auxiliary drive electronic control and all-in-one integrated electronic control, customized products series etc, realize the best matching of electric vehicle power system and vehicle system, also covers application requirements of commercial vehicles, passenger vehicles, special vehicles. They provide customers with excellent electric control system solutions for Battery electric vehicles, extended range vehicles, fuel cell vehicles to create more value. The company enjoys high customer’s trust and industry reputation, and directly or indirectly serves dozens of well-known domestic new energy vehicle companies, such as FOTON, SUNWIN, DONG FENG, KING LONG, HIGER, SANY, ZOOMLION, GOLDEN DRAGON, ANKAI, XCMG MACHINERY, SKYWELL, CAMC, SHAANXI AUTOMOBILE etc.
Benefiting from the release of the "New Energy Automobile Industry Development Plan (2021-2035)", the development of the new energy automobile industry brings new development opportunities. Shenzhen V&T Technologies Co.,Ltd. is full of confidence in the market and will gain a broader market space and usher in greater development opportunities. The General Office of the State Council recently issued the "New Energy Automobile Industry Development Plan (2021-2035)" (hereinafter referred to as the "Plan"). The "Planning" pointed out that it is necessary to follow Xi Jinping's new era of socialism with Chinese characteristics as a guide, adhere to the new development concept, adhere to the development direction of electrification, connectivity, and intelligence, break through key core technologies, and accelerate the construction of a powerful electric automobile country. The "Plan" deployed five strategic tasks: The first is to improve technological innovation capabilities. The second is to build a new industrial ecology. The third is to promote the development of industrial integration. The fourth is to improve the infrastructure system. The fifth is to deepen open cooperation. The "Plan" requires that the market mechanism should be fully utilized to promote the survival of the fittest. Starting from 2021, the proportion of new energy vehicles in public areas in the national ecological civilization pilot zone and key areas for air pollution prevention and control will not be less than 80%. Shenzhen V&T Technologies Co.,Ltd masters the core technology of new energy vehicle E-drives system, and provides various electronic control system solutions such as battery electric vehicles, hybrid vehicles, and fuel cell vehicles, covering the needs of commercial vehicles, passenger vehicles, special vehicles and other automotive applications. We have established reliable long-term cooperative relations with many well-known car companies in domestic and foreign markets. As the main supplier of motor controllers for new energy vehicles in my country, V&T has great development potential, strong competitiveness and rich experience. It has obvious advantages in product development, production scale and efficiency, and is in the forefront of the industry. In 2020, under the tense situation of the continuous spread of the global Covid-19 epidemic, the company still achieved sound development of business and customers within the three quarters, and achieved good growth in performance and profits! The "Plan" will bring major benefits and new development opportunities to the new energy automobile industry. V&T is willing to contribute to high-quality, sustainable development of my country's new energy automobile industry with excellent and reliable motor controller products! ⬛ For Shenzhen V&T Technologies Co.,Ltd.( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new ...
For decades, China's auto industry has grown from nothing, from small to large, from weak to strong, from a traditional fuel-powered car country to an electric car power country. As a battery electric sanitation vehicle in the public service field, it has become an important areas in electric vehicle. The successful application of "Dongfanghong" battery electric sanitation vehicles equipped with V&T electric vehicle motor controllers has made new and greater contributions to the green development of urban sanitation. In recent years, Sanitation vehicle industry has rapidly entered the era of battery electrification. Its appearance is not only no pollution to the environment, but also greatly reduce the cost of using cars. While developing traditional sanitation products, China Yituo Group Co., Ltd. attaches great importance to the investment of new product R&D, also joins hands with V&T to create high-quality, high-tech and high-environmental new energy sanitation vehicles for sanitation industry. With "Dongfanghong" series of battery electric washing, sweeping vehicles independently developed and designed by China YTO, bodywork project equipped high-quality V&T electric vehicle motor controller with power from 3.7kW to 120kW. The vehicle integrates functions of a road sweeper and a high-pressure cleaning vehicle, also integrates control of machine, electricity, fluid, water etc. It has various operation functions such as pavement cleaning, pavement scrubbing, high-pressure cleaning, roadside scrubbing, garbage collection, sewage recovery, spraying and road isolation wall cleaning etc. The "Dongfanghong" series of battery electric cleaning vehicles are new high-efficiency cleaning equipment used in outdoor environments. They achieve "zero pollution", "zero emissions", and "low noise", also continuously contribute to improvement of urban air quality and good living environment. In the future, V&T will continuously promote the electric control technology innovation of environmental sanitation vehicles, provide industry customers with excellent, comprehensive electrification solutions in urban sanitation vehicle, also make new and greater contributions to green development of environmental sanitation in China! ⬛ For China Yituo Group China Yituo Group Co., Ltd. (referred to as China Yituo) is an agricultural equipment manufacturing enterprise affiliated to China National Machinery Industry Corporation. Its predecessor was the first tractor manufacturing plant, which was founded in 1955, and was one of the 156 key construction projects in China during the “Five-Year Plan” period. After more than 60 years of development, China Yituo has formed a large-scale equipment manufacturing enterprise group with agricultural machinery as its core and operating multiple products such as power machinery, vehicles and parts. The agricultural machinery business has a complete domestic tractor product line and product technology with independent ...
According to Xinhua News Agency, after several days of busy construction, the "Blessings of the Motherland" flower basket was officially completed and appeared in Tiananmen Square to meet with citizens and tourists to celebrate the National Day. Time flies so fast, unknowingly it's the annual National Day. I remember that on October 1st last year, before the National Day military parade, the "Military Parade Zero Array" equipped with V&T V6-H-4D110G electric vehicle motor controller-BEE Equipment's battery electric car sweeper fleet, made a stunning appearance on Tiananmen , Undertook the cleaning of Chang'an Street, and showed the world the level of China's green technology and high-end manufacturing. "Military Parade Zero Square" battery electric cleaning and sweeping sanitation vehicle equipped with V&T E-drive system (video, picture source: People's Daily Online) Shenzhen V&T Technologies Co.,Ltd. Electric Vehicle Motor Controller, as one of the core components of battery electric large-scale washing and sweeping vehicles, escorts the performance and high quality of the National Day military parade washing and sweeping vehicles. Its importance and particularity are self-evident. With its high-reliability motor controller products, V&T assisted the smooth delivery of a new generation of large-scale battery electric vehicles (sweeping) developed by Beijing Environmental Sanitation Engineering Group Limited, shining on the scene, and successfully used in major sanitation activities for the 70th anniversary of the National Day . The five-star red flag is fluttering in the wind. On the occasion of the National Day approaching, V&T company wishes the motherland prosperity! ⬛ ; Beijing Environmental Sanitation Engineering Group Limited As a professional industrial group with the strongest scale and comprehensive strength in the capital's sanitation field, Beijing Sanitation Group actively fulfills the political and social responsibilities of state-owned enterprises in the capital, and has long been committed to comprehensive urban and rural environmental services, waste resource utilization, solid waste equipment manufacturing, and sanitation technology R&D, environmental sanitation engineering construction and other fields, can provide customers with integrated services such as project planning, process design, investment and financing construction, and operation management. It is the country's leading state-owned enterprise that provides cleaning and cleaning, solid waste collection and transportation, and solid waste treatment services. It is also one of the most complete, large-scale and comprehensive professional industrial groups in my country's environmental sanitation industry chain. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-t...
The protection level of new energy vehicles is generally IP67, while the integrated E-drive of V&T company has reached IP68, which means it is an "invincible" state. So what does IP68 stand for? Shenzhen V&T Technologies Co.,Ltd. E-drive controller has passed inspection by the third-party professional Recently, Another brand-new V&T electric vehicle motor controller was born. With reference to the testing methods specified in the test items of a well-known domestic automobile manufacturer's parts accreditation requirements, all tests were completed before mass production. At the same time, in the third-party professional organization*1 laboratory designated by the car company, it has successfully passed more than 80 test items in seven categories. This article reveals the mystery of IP protection level test (one of more than 80). Immerse the integrated controller in water? Yes, you are right. The two V&T brand new integrated controller prototypes in the picture are undergoing strict IPX8 waterproof test by a third-party professional laboratory designated by a well-known car company before batching. The controller is immersed in water of 1 meter deep under normal temperature and pressure for 24 hours without any harmful effects, and product performance will not be affected in any way. After the test, the appearance was normal. Open the shell and check that there is no water ingress. The liquid protection level of V&T motor controller reaches level 8, with safe waterproof performance. The sand and dust test box is turned on (the vibrator is on, the fan operating frequency is 50Hz, and the vacuum is on), the dust concentration is 2kg/m3 talcum powder, and the dust is blown continuously for 8 hours. After the test is over, disassemble the shell to check that there is no dust infiltration inside the controller, which completely prevents foreign objects and dust from entering. The solid-state protection level of the V&T integrated controller reaches level 6 (the highest level is level 6). Obviously, the IP68 protection level of V&T integrated controller is not for "gimmicks", but to effectively enhance the protection safety, and the high protection level can better protect the safety and normal use of the vehicle. In recent years, V&T has won customer recognition by virtue of its technological advantages and has become a leader in the industry. In the future, V&T will continue to increase scientific and technological research and development, pay attention to product safety and quality, continuously improve product competitiveness, create value and benefits for customers, and contribute to the construction of a safe, green and environmentally friendly travel and transportation environment for the society! This test was completed by a third-party testing agency designated by the vehicle manufacturer. The technical capability of this institution has been recognized and authorized by many domestic and foreign authoritat...
Recently, the signing ceremony of "Quality and Technology Infrastructure Project of Zhejiang Provincial Market Supervision Administration-Based on the Research of Integrated Elevator Safety Management and Application Technology" was held in Huzhou city. members attended the meeting : Huzhou Special Equipment Inspection and Research Institute China Science and Technology Satellite Application Deqing Research Institute Internet of Things Research and Development Center in Chinese Academy of Sciences Shenzhen V&T Technologies Co.,Ltd Fuzhou Development Zone Chuangda Electronics Co., Ltd. "Zhejiang Market Supervision Bureau Quality and Technology Infrastructure Construction Project" "Research on Integrated Elevator Safety Management and Application Technology" project cooperation was successfully signed. After years of development, China has become a major producer and seller of elevator equipment. As of the end of 2019, the total number of elevators in my country has reached more than 7.5 million units. In 2019, the output of elevators was close to 1 million units, an annual increase of over 15%. Elevators are a relatively large type of special equipment, and the task of safety supervision is very difficult. "Opinions of the General Office of the State Council on Strengthening Elevator Quality and Safety Work" Further strengthen the awareness of quality and safety in accordance with the requirements of high-quality development, take reform and innovation as the driving force, focus on the implementation of the main responsibility of the production and user unit, and use scientific supervision as a means to prevent also reduce accidents, reduce the failure rate, and continuously improve the quality and safety of elevators, so that the people can take the elevators safely and trustingly, so as to meet the people's growing needs for a better life." In response to the current problems of insufficient data and poor quality obtained by elevator IoT sensors, Shenzhen V&T Technologies Co.,Ltd., who has rich experience in China's industrial automation, new energy vehicle motor control, also elevator inverter control, and Huzhou Special Equipment Inspection and Research Institute, Chinese Academy of Sciences, etc. The units jointly signed a cooperation agreement on the "Quality and Technology Infrastructure Project of Zhejiang Provincial Market Supervision Administration-Based on the Research of Integrated Elevator Safety Management and Application Technology". The project aims to use the experience and advantages of their respective fields through the strong alliance of multiple units to jointly develop new data collection equipment and the introduction of new algorithms to make information acquisition and dangerous behavior identification more accurate and efficient. On this basis, a large database of elevator Internet of Things is built, combined with big data analysis, to provide scientific support for on-demand maintenance, so that the supervisio...
The successful release of AIEC3300 integrated elevator controller fully demonstrates the strong innovation strength and R&D ability of V&T in the field of motor drive. At present, it has been used in batches in domestic and foreign markets. The technical performance indicators have reached the advanced level of the industry. AIEC3300 elevator inverter adopts high-performance vector control technology, which not only has excellent control performance, but also combines the mainstream logic control technology of elevator to realize the organic combination of elevator motor control and drive. It has the characteristics of safety and reliability, simple debugging, compact structure and high price-ratio performance. Applicable fields AIEC3300 integrated elevator drive has full power coverage, provides cabinet and accessories both for MRL and machine room elevator. It meets the application of new machine matching, old elevator transformation, maintenance and other applications in the elevator industry such as ordinary passenger elevator, villa elevator, cargo elevator and sightseeing elevator. Strong Quality Inspection Ability V&T has domestic advanced production system in electric vehicle motor controller, medium-low voltage frequency drive and servo drive, which gives AIEC3300 integrated elevator drive products better quality assurance. CE Certification and Type Test For Special Equipment AIEC3300 integrated elevator drive has passed CE certification, obtained the type test certificate and report of all-in-one machine and control cabinet, complies with the new national standard and European standard (EN81), ensures the safety and reliability of elevator control, and has the qualification of production and sales at home and abroad. Meet the standards of China, Southeast Asia, Russia, the Middle East and other countries to improve the competitiveness of elevator market. Real Time Monitoring V&T industrial Internet of things system integrates the functions of data acquisition, data processing and data presentation 24-hour uninterrupted service, through database integration, calculation and analysis, can provide more accurate and effective data analysis for elevators, and provide reliable one-stop solutions for industrial Internet of things for elevator users. Delivery Capability In order to meet the market demand of the follow-up elevator industry, V&T will successively launch more products, enrich and expand the product line, and improve the delivery capacity and market share. Technical Training V&T provides complete technical training services including installation and debugging, product upgrading, etc. Facing the new trend of market development in the elevator industry, V&T continues to increase R&D investment, deepen the integrated development strategy of hardware, software and Internet of things, and continuously contributes to the technological innovation of the elevator industry and provide more excellent performa...
Today, V&T announced new family members in motor controller series and the official release of AIEC3300 integrated elevator drive products. Equipped with self-developed high-performance vector torque platform, It can meet the application of ordinary passenger elevator, villa elevator, cargo elevator, sightseeing elevator and other elevator industries. This product condenses the accumulation of V&T motor control technology for more than ten years, and aims to comprehensively improve in safety, economy and comfort experience to elevator industry in home and abroad, and bring more choices and surprises to the majority of partners and customers in elevator industry. V&T AIEC3300 Integrated Elevator Drive V&T has mastered the core control technology of elevator motor drive. With its strong R&D strength, talents focus and excellent performance products, it has become a reassuring choice for many industry leading customers and well-known enterprises, enjoying trust and industry reputation. In the development route of motor control technology, and in the process of continuous technical accumulation and iteration, V&T medium-low voltage frequency drives, servo drives, electric vehicle motor controllers and other products are widely used in the field of industrial automation and new energy vehicles. Facing the increasing demands of safety and comfort in the elevator industry, according to the characteristics of elevators at home and abroad, the company has developed AIEC3300 integrated elevator controller products that meet the market demand. Since its birth, it has been in line with the positioning and standards of high starting point, high performance and high reliability, so as to provide safer and comfortable building traffic solutions for the elevator industry. Applications With the concept of down-to-earth and progressive, combined with profound technical accumulation and advantages, we believe that V&T will rapidly grow into the backbone in the field of elevator control, strive to create high-quality products for the elevator industry and contribute to the elevator industry ! For Shenzhen V&T Technologies Co., Ltd. Shenzhen V&T Technologies Co., Ltd. was certificated as a "National Hi-tech and Double-Software Enterprise", which has fully intellectual property rights and devotes to the R&D, manufacture, sales and technical service of Inverter (VFD/VSD), Servo Drive, Electric Vehicle Motor Controller, etc. V&T has won the “Technical Innovation” prize awarded by the AC Inverter Industry Association, “The Most Competitive Brands” prize awarded by China Electrical Association, "2012 Electric Vehicle Excellent Technology" prize respectively awarded by China Electric-technical Society (CES), the Specialized Committee of Electric Vehicles, the Automotive Engineering Society of China, and the Branch Association of Electric Vehicles. V&T has been ranked as one of the “Top 10 Chinese AC Drive Enterprises”. V&...
In order to reduce the risk of the spread of Covid-19, in the case of the closure of cities and roads during the epidemic, some cities carried out spray and disinfection along the street. Among them, the high-efficiency dust suppression vehicle (spray vehicle, commonly known as fog gun car) equipped with V&T high-performance E-Drive controller played an active role in the "front line" of the pneumonia epidemic, contributing to the anti-epidemic sniper war and guarding city security. Dust suppression vehicle is new type of sanitation vehicle that has been born in the sanitation vehicle industry in recent years. Mainly used for spraying, dust-fall and removing haze, It has the purposes of air purification, garden greening, municipal sanitation, disinfection and sterilization, pesticide spraying, etc. It is another powerful force in sanitation vehicles. In recent years, V&T electric vehicle motor controllers have been widely used in many dust suppression vehicles of many domestic automakers. Mainly control the fan, water pump and sprinkler pump of the dust suppression vehicle. Dust suppressor motor controller has the characteristics of stable performance, small size, lighter weight, saving installation space, etc., and has high customer trust and industry reputation. In order to reduce the risk of the spread of Covid-19, in the case of the closure of cities and roads during the epidemic, some cities carried out spray and disinfection along the street. The high-efficiency dust suppression vehicle equipped with V&T high-performance motor controller played an active role in the "front line" of the pneumonia epidemic. Through the Shenzhen V&T Technologies Co.,Ltd motor controller, the high-power plunger pump atomizes the diluted 84 disinfectant into micron-level particles, and then sprays it into the sky through a high-power fan to play the role of disinfection, sterilization and epidemic prevention. At the same time, it can achieve the functions of dust reduction, decomposition and desalination of particle concentration in the air, and effective decomposition of pollutant particles and dust in the air. V&T electric vehicle motor controller helps the dust suppression vehicle to adopt new technologies that are more advanced, more scientific, and lower in energy consumption, and contribute to the pneumonia epidemic. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it was successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-d...
On July 9, Shenzhen V&T Technologies Co., Ltd. and Huizhou BYD Battery Co., Ltd. signed a strategic cooperation framework agreement. Ceremony has been held in Guangming District, Shenzhen. Mr. Qiu Wenyuan, Chairman and General Manager of V&T, and Mr. He Long, Vice President of BYD Group and Chairman of BYD Battery, respectively signed cooperation agreements on behalf of both companies. Representatives of both parties attended and witnessed the signing of the agreement. According to the agreement, the two parties plan to carry out comprehensive and in-depth cooperation in the application and promotion of products such as motor controller units, integrated electronic control, power batteries, high-voltage DC relays, metalized film capacitors, and high-voltage DC fuses etc. This powerful alliance aims to help both parties further improve overall operating efficiency and reduce operating costs, jointly create the most competitive products, realize the future market expansion strategies of both parties, create greater business value for both parties, and achieve mutual benefit and win-win results. In recent years, Shenzhen V&T Technologies Co., Ltd. has actively carried out multi-mode strategic business cooperation with leading companies in the industry to create an industrial ecological pattern of complementary advantages and win-win cooperation within upstream and downstream industries. Among them, in November 2019, the company signed a strategic cooperation framework agreement with BYD Microelectronics (predecessor of BYD Semiconductor); in May 2020, the company and BYD Semiconductor jointly established a "joint innovation laboratory"; In June 2020, the company's subsidiary Xinyu V&T invested RMB 25 million to participate in the equity investment of BYD Semiconductor. The above cooperation is conducive to the strategic extension of the company's core raw materials such as IGBT modules and wafers, SiC modules and wafers , And the company's E-drive motor drive controller and related products technology promotion and industrial layout. This strategic cooperation between the V&T company and Huizhou BYD Battery marks a long-term and stable strategic cooperation relationship. In the future, V&T and BYD will strive for more in-depth and specific cooperation projects. Achieve supply chain optimization and complementarity, resource advantage stacking, also create an ecological win-win situation in industry chain. It continues to enhance the company's industry market competitiveness, in order to promote the continuous improvement of the technical level of China's new energy vehicle industry, promote the new energy vehicle industry harmony, health and rapid Contribute to development. ⬛ About Huizhou BYD Battery BYD was founded in 1995. From the leased factory building in 1995 to the end of 2018, BYD has built more than 30 production bases and more than 40 branches in the world; It is a high-tech enterprise that crosses the fo...
On May 27, Shenzhen V&T Technologies Co.,Ltd. and BYD Semiconductor Co., Ltd. jointly established a joint innovation laboratory in Guangming, Shenzhen. Mr. Xu Xuehai and Mr. Yang Qinyao, leaders of both companies, attended the ceremony. Afterwards, the discussion and exchange on the construction of the joint innovation laboratory and the product development plan were hold. Taking advantage of the opening ceremony of the Joint Innovation Lab, both companies will have more and more in-depth cooperation in resource sharing, technological innovation, and talent exchange. Gather resource advantages, carry out joint experiments and cooperative research, and create more competitive products. Jointly build the development and application test platform of SiC and IGBT power semiconductors, carry out the development and application research of core devices of motor controllers for new energy vehicles, and improve the reliability, safety and cost performance of products. Manufacturing is the main body of the national economy, the foundation of building a country, the instrument for rejuvenating the country, and the foundation for strengthening the country. For a long time, BYD, as a typical enterprise of "domestic development, self-improvement", insists idea that "technology is king, innovation-oriented" goes to the world. V&T takes "technological innovation" as its core competitive advantage. Two brands that are at the forefront of the industry, together carrying "innovation genes" are bound to create more competitive products, and jointly help the accelerated rise of China's manufacturing 2025. ⬛ About BYD Semiconductor Co., Ltd. BYD Semiconductor Co., Ltd. (BYD Semiconductor) is a leading semiconductor IDM company in China, mainly engaged in power semiconductors, intelligent control IC, smart sensors, optoelectronic semiconductors, manufacturing and services, products are widely used in automobiles, energy, industry, communications and consumer electronics, etc. The field has broad market prospects. BYD Semiconductor has always served customers with high quality, determined to become an efficient, intelligent, and integrated new semiconductor supplier, providing customers with leading semiconductor finishing solutions. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it was successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-doctoral innovation practice base. With two R & D centers in Shenzhen city and Wuxi ...
Recently, the 18-meter "Big Mac" Battery electric BRT equipped with V&T motor controller driven in batches on the streets of a coastal city. In addition to green, low-carbon, efficient and safe operation, BRT has further improved the capacity of urban public transport, alleviated the peak passenger flow, and become a beautiful scenery. As the city becomes "larger", the number of E-vehicles and pedestrians on the streets is also increasing rapidly. In addition to the construction of rail transit, some cities have begun to construct BRT, and BRT has become an important symbol of urban construction. So, what is BRT? Bus Rapid Transit (BRT) is a new type of public passenger transportation system between rapid rail transit and conventional bus. It is a large-capacity transportation method and is also often called "the subway on the ground." system". It is a unique urban passenger transportation system that integrates modern bus technology, cooperates with intelligent transportation and operation management, opens up dedicated bus routes and constructs new bus stations, realizes rail transit operation services, also reaches the light rail service level. Recently, the 18-meter "Big Mac" Battery electric BRT equipped with V&T battery electric bus drive was driven in batches on the streets of a coastal city. In addition to green, low-carbon, efficient and safe operation, BRT has further improved the capacity of urban public transport, alleviated the peak passenger flow, and become a beautiful scenery. This model has a larger body than the conventional 10m or 12m Battery electric bus, with more space and a full load of up to more than 100 people, to meet the needs of ultra-large capacity loading. BRT has a positive effect on improving the operational efficiency of urban public transportation and alleviating the traffic pressure during urban peak hours. It is believed that in the near future, BRT equipped with V&T electric control solution will appear more frequently in major cities, carrying citizens to travel and improving the city lever. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it was successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-doctoral innovation practice base. With two R & D centers in Shenzhen city and Wuxi city, It is based on independent technology research development and product innovation, keeping up with the world's advanced level. The main drive motor controller, auxiliary drive...
Recently Two hundred hydrogen-fueled buses equipped with V&T electric vehicle motor controllers completed in Foshan, Guangdong. The project is the order with the largest number of bids for hydrogen fuel buses in the world in December 2019. Its operation will contribute to the reduction of PM2.5 in the Guangdong-Hong Kong-Macao Greater Bay Area and the effective protection of urban clean air. 200 hydrogen-fueled buses equipped with V&T e-mobility motor controllers（2020.01.09） As a motor controller supplier in the new energy automotive industry, Shenzhen V&T Technologies Co.,Ltd. provides excellent electric control solutions for these 200 hydrogen fuel buses. Both the advanced technology and the timely supply chain system have been highly recognized and praised by vehicle factory. A few days ago, these batches of hydrogen-fueled buses have completed the licensing work. Its operation will contribute to the reduction of PM2.5 in the Guangdong-Hong Kong-Macao Greater Bay Area and the effective protection of urban clean air. 200 hydrogen-fueled buses equipped with V&T electric motor controllers completed the licensing work The Ministry of Industry and Information Technology has publicly solicited opinions from the public on the "New Energy Vehicle Industry Development Plan (2021-2035)" (Draft for Comment). The consultation draft clearly stated that in the future, a pure electric vehicle, plug-in hybrid (including extended miles range) vehicles, and fuel cell vehicles will be the leading R & D layout. V&T electric control products are in line with the national development plan for the new energy vehicle industry. They are widely used in pure electric, extended range, hydrogen fuel vehicles and other new energy vehicles. It has formed its own advantages and characteristics, also quality and brand have strong competitiveness. Now, with the publication of the public opinion draft of the Ministry of Industry and Information Technology, It marks that the implementation of the "New Energy Vehicle Industry Development Plan (2021-2035)" will be further accelerated. Coupled with the company's continuous exploration and improvement of technology research and development, It is believed that in the near future, hydrogen fuel cell vehicles will become mainstream technology and a new flag in the power car industry. V&T is willing to contribute to the development of the hydrogen energy automobile industry! ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Well-known Supplier of Electric Vehicle Motor Controller ) V&T Founded in 2006. it is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research...
On March 4, the Guangdong Provincial Department of Science and Technology issued the "Notice of the Guangdong Provincial Department of Science and Technology on Recognizing the Guangdong Engineering Technology Research Center in 2019". The Control Engineering Technology Research Center is listed on the Guangdong Engineering Technology Research Center. This shows that V&T's strong industrial design capability and innovation level in the field of new energy vehicle drive and control have been fully affirmed by the Provincial Science and Technology Department and the industry. Shenzhen V&T Technologies Co.,Ltd started the research and development of E-Vehicle motor controllers in 2008, based on independent technology development and product innovation, keeping up with the world's advanced level, and spared no effort to explore and test on the road of product development and technological innovation. We have accumulated rich experience in the application of various types of electric vehicles such as commercial cars, logistics vehicles, special-purposed vehicles, special vehicles, and passenger vehicles. With the development of China's new energy vehicle industry for more than ten years, we have achieved remarkable results. It is highly recognized and praised by many international and domestic customers. Now, V&T has formed its own advantages and characteristics in new energy e-mobility drive and vehicle product technology, laying a good foundation for the construction of Guangdong New Energy Vehicle Drive and Control Engineering Technology Research Center and the industrialization of new energy vehicle motor controllers. basis. In the future, Shenzhen V&T Technologies Co.,Ltd. will rely on the engineering center, continue to increase investment in design innovation, and improve the level of industrial design services, which will become a high-quality engineering center in Guangdong and even the country. Cultivate scientific and technological innovative talents, vigorously promote technological innovation, deepen the cooperation of industry, university and research institute, and provide a favorable platform support for promoting the transformation of various technological achievements and successfully achieving industrialization. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Well-known Supplier of Electric Vehicle Motor Controller ) V&T Founded in 2006. it is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-doctoral innovation practice base. With two R &...
On March 16, with the accurate positioning of the last cable stock, it marked the successful completion of the traction work of the main cable of the Fenglinte Bridge on the Xingyi Huancheng Expressway. Has laid a solid foundation. V&T’s high performance and high efficiency frequency inverter (VFD/VSD/AC Drives/Inverters) has excellent stable performance, and plays an important role in the smooth completion of the main cable traction of the bridge. Fenglinte Bridge, the first long-span steel-concrete composite beam suspension bridge in the mountainous area of China, has a height difference of 364.2 meters from the deck to the valley floor, which is equivalent to about 120 floors. The hoisting of the prefabricated middle beam of the 1470-ton main tower weighing 1470 tons has set a world record for the precast hoisting concrete components of mountain valley bridges! The main cable construction is the focus and difficulty of the key process of the construction of Fenglinte Bridge, and it is also the main stress system of the suspension bridge. The main cable is divided into two pieces on the left and the right, with a length of about 971 meters and a total weight of 4131 tons. The single-frame main cable has a total of 131 cables (including 4 back cables). Each cable is composed of 91 zinc-aluminum-magnesium coated steel wires with a diameter of 5.45 mm. The maximum weight of a single cable strand is approximately 16.4 tons. The winch system configured on both sides of the bridge has very high requirements on the performance, stability and reliability of the drive. The excellent performance of V&T’s V6-H torque vector frequency drives has played an important role in the main cable traction of Fenglinte Bridge. Both the advanced motor drive control technology and the stability of the products have been highly recognized and praised by users. During equipment commissioning, V&T’s technical engineer Mr Ma, needs to walk back and forth on the "catwalk" of the bridge. He said: "The bridge is more than 360 meters away from the bottom of the valley. Just thinking about it has already made" legs soft ". This time it has refreshed the" limit "of his fear of height. Walking on the" cat road ", there is a kind of fog I feel a little nervous but very shocked. I really admire the "iron army" spirit of the bridge builders' hard work, selfless dedication, and hard work. Since the start of construction of the bridge, CCTV's "News Network", "Chaowentianxia", "Great Power Transportation", Xinhua News Agency, People's Network and local media have focused on the construction of Fenglinte Bridge and made relevant reports. For many years, the high-performance, high-quality AC Inverters and other products developed and produced by Shenzhen V&T Technologies Co.,Ltd have always contributed to domestic infrastructure projects and contributed to the construction of transportation in a big country! ⬛ For Shenzhen V&T Technologies Co., Ltd. Shenzh...
On January 10, 2020, Shenzhen V&T Technology Co., Ltd. (Stock Code: 300484) won the best Information disclosure award in the third China Excellent IR Selection. The selection results were announced in the third China excellence IR in the 2020 Investor Relations Innovation Summit and ceremony held on January 10. Mr. Su Jihai, the securities representative of the company, accepted the award on behalf of the company. The award clearly shows the recognition of the investment community for V&T. "China Excellent IR Annual Selection" is jointly launched by the International Roadshow Center of listed companies and Excellent IR. It focuses on IR managers, IR directors, securities affairs representatives, board secretaries, CFOs, etc. dealing with investor relations of listed companies, and presents annual awards to those workers who devoting silently behind the scenes. In recognition of outstanding listed companies and IR workers' efforts promoting innovation and efficiency in the whole industry, the award has become one of the most professional awards focusing on the IR field in China. A total of more than 500 listed companies submitted materials for the evaluation. Focusing on the quality of Information disclosure, corporate value, corporate management and IR practice of listed companies, combined with questionnaire scores and online voting results, 167 awards in ten categories were awarded. The "China Excellent IR Best Information Disclosure Award" won by the company this time aims to praise the information disclosure teams in 2019. Company obtained a rating of class A or above by the CSRC, is fair, impartial and open to each investor. They can handle the information disclosure work in real, accurate, complete and timely manner, and plays an exemplary role in the industry. The fairness, impartiality and openness of information disclosure are the cornerstone of the market. The compliance of information disclosure is the premise for a company to win the trust of investors. The company has established a work foundation based on information disclosure, focusing on how to improve the proactive disclosure of investor relations content, so as to achieve compliant, effective and valuable information disclosure; Focus on different investors' preferences and establish targeted communication with investors based on the company fundamentals, strategic planning, etc. The management of the company also attaches great importance to communication activities, actively organizes investor research activities, actively participates in strategy meetings, etc. This award will encourage the IR team to continue to emphasize and improve investor relations management and serve the majority of investors well. V&T is a GEM listed company and a national high-tech enterprise. Its products and solutions in the field of power electronics such as electric vehicle motor controller, medium-low voltage frequency drive and servo drive are well-known in the industry. For Shenzh...
Recently, the Shenzhen Municipal Human Resources and Social Security Bureau approved 75 units including Shenzhen V&T Technologies Co.,Ltd. to set up a post-doctoral innovation practice base. The establishment of the post-doctoral innovation practice base is the result of V&T's long-term adherence to technological innovation and emphasis on research and development. It is also a breakthrough in the construction of a high-level innovative talent platform. V&T builds high-end electric motor drive research laboratories and technology centers, and uses post-doctoral innovation practice bases to promote the cooperation with universities and research institutes to create conditions for the company to introduce high-level technical talents and cultivate and enhance research capabilities. Shenzhen V&T Technologies Co.,Ltd. will take this opportunity of deploying the post-doctoral practice and innovation base, make full use of the post-doctoral innovation and practice base platform, deepen the cooperation between industry, university and research institute, strengthen the construction of R&D team and R&D capabilities, promote the transformation of scientific research results, and implement the company's scientific and technological innovation drive strategy, further enhance the company's core competitiveness, and establish sustained industry technology effect.
On January 10, the signing ceremony of strategic suppliers of Nanjing Skywell truck division was successfully held. As a core supplier, V&T attended the meeting and signed a strategic cooperation agreement with Skywell automobile group to provide reliable EV motor controller products and services. With the solemn signing of the strategic cooperation agreement by the representatives, it marks the official opening of the mutually beneficial and win-win comprehensive strategic cooperation between V&T and Skywell automobile group. The two sides will build a win-win and sustainable strategic partnership in the field of new energy vehicles around the application of motor controller units and integrated electric drive control products, so as to realize the common development of both sides. V&T has long-term and successful cooperation experience with domestic mainstream vehicle enterprises. It is a well-known motor controller manufacturer in the field of new energy vehicles. As a core parts supplier, the company has been working silently in the field of motor drive for many years. With a deep understanding of motor drive and rich experience in vehicle application, the company continues to bring forth the new through the old. Whether it is advanced technology, timely supply chain system, and responsible technical services, V&T can meet the strict procurement standards of Skywell automobile, and meet the batch matching needs of all kinds of vehicles. In 2019, V&T assisted Skywell automobile won the order of 1000 battery electric dredger trucks in Shenzhen, setting the largest batch order in Shenzhen at that time, then added 200, a total of 1200. The above picture shows the delivery ceremony of the first 300 Skywell battery electric heavy trucks equipped with V&T motor controller. For Skywell New Energy Vehicles Group Co.,Ltd. Nanjing Skywell Heavy Industry Co.,Ltd. is a wholly-owned subsidiary of Skywell New Energy Vehicles Group Co.,Ltd. Skywell New Energy Vehicles Group Co.,Ltd. is a high-tech enterprise integrating R&D, production, sales and service of new energy vehicles and core parts. In 2010, Huang Hongsheng, founder of Skyworth Group, established Skywell automobile group in Nanjing to acquire and restructure Nanjing Golden Dragon Bus Co.,Ltd. After holding Nanjing Golden Dragon, Skywell Automobile Group has made great efforts to shift its focus from traditional medium bus to new energy vehicles, becoming the only headquarters enterprise of new energy commercial vehicle in Nanjing. Headquartered in Lishui Development Zone, Nanjing, Skywell automobile group covers an area of 830,000 square meters, a construction area of 500,000 square meters and a total investment of 4.3 billion CNY. It can produce 20,000 large and medium-sized buses, 200,000 light buses and 100,000 passenger cars per year. At present, the company has more than 4,000 employees across the country and has established production bases in Shenzhen, Wuhan,...
On January 4, the 2019 annual excellent supplier conference of BIT Huachuang Electric Vehicle Technology Co.,Ltd. (hereinafter referred to as "BIT Huachuang") with the theme of "working together to create the future" was grandly held in Beijing. V&T has made positive contributions to win the market for BIT Huachuang by continuously improving the professional quality and innovation ability of products, and won the title of "technological innovation award" of excellent supplier of BIT Huachuang in 2019. Over the years, through in-depth integration of their professional experience and continuous innovation in products and technology, V&T and BIT Huachuang have continuously carried out in-depth cooperation in the field of new energy vehicles , and their products have been widely used in mainstream vehicle manufacturers. As an excellent motor controller supplier of BIT Huachuang, V&T has always focused on improving product E-drive Motor control performance and innovation ability. The product has compact design, high power density, convenient installation, strong environmental adaptability, high system efficiency and protection level. These meet the application needs of various models such as passenger vehicles, logistics vehicles, special vehicles, special-purposed vehicles and commercial vehicles etc. Professor Lin Cheng, chairman of Huachuang, said that I was impressed by the excellent performance and high quality of the V&T motor controller. The products have been verified and recognized by the market in terms of safety, reliability and service life. Excellent suppliers are an indispensable force for the high-quality development of enterprises. Thank V&T for making positive contributions to the development of BIT Huachuang for many years. This award is a full recognition and praise for the comprehensive strength, industry position, R&D and innovation level, production supply chain and technical services of V&T in the field of electronic control of new energy vehicles. The first on the right is the representative of V&T Through the conference, the confidence of cooperation between the two sides has been enhanced and a stronger cooperative relationship has been forged together. V&T has the confidence and ability to do better products and create brilliance together with BIT Huachuang! In 2020, let's seize the day and live up to our youth! For Shenzhen V&T Technologies Co., Ltd. ( Part of Electric Vehicle Motor Controller ) Established in 2006, Shenzhen V&T Technologies Co.,Ltd. is a well-known supplier of industrial automation and new energy electric drive control products. In 2016, it was listed on the Growth Enterprise Market of the Shenzhen Stock Exchange (stock code: 300484). The headquarter locates in Shenzhen, and has two R&D centers in Shenzhen and Wuxi, as well as the Guangdong New Energy Vehicle Drive and Control Engineering Technology Research Center, the Postdoctoral Innovation Practice Base, ...
Good News! Extended Range EV Commercial Vehicle (EREV) with V&T EV motor controller batch supporting is on the market. V&T, with its independently developed and produced E-drive motor controller for commercial vehicles, cooperates with a well-known domestic car company. After nearly half a year of close cooperation between the professional teams of both sides, it has successfully completed a series of rigorous tests of extended range EV commercial vehicle (EREV). The batch supporting commercial vehicles have been successfully listed in the second half of 2019. V&T has a development process in line with commercial vehicles Follow the quality system standards of the automobile industry from the aspects of design, development, testing, production and inspection. Infineon main control chip hardware platform is adopted to support the boot loader based on UDS, the online program update function of international mainstream automotive electronic products and UDS diagnosis function. Integrating excellent supply chain resources at home and abroad and benchmarking with high international standards provides a strong guarantee for building high-quality commercial vehicles electric drive control products. V&T products have been tested by a third-party professional organization The motor controller and e-mobility vehicle system of V&T electric vehicle have successfully passed the professional and strict test of the third-party testing organization -HiRain Technologies, and the products meet the relevant technical requirements of EREV drive system. CAN Communication Specification Unified Diagnostic Service Specification Bootloader Refresh Specification V&T products have passed the test and acceptance of commercial vehicles The V&T motor controller has the characteristics of compact design, high power density, convenient installation, strong environmental adaptability, high system efficiency and protection level, and meets the development needs of commercial vehicles. How does an excellent product perform in the vehicle application scenario ? In 2019, the EREV commercial vehicles equipped with V&T motor controller has spanned five or six provinces and regions for more than 10000 kilometers after more than half a month. Among them, about 45% of the high-speed road tests, about 50% of the mountain road tests and about 5% of the operation tests under bad road conditions. Regional road section for route test Taklimakan desert with harsh environment Ruoergai Wetland with complex road conditions Flame Mountain with ground temperature up to 55 degrees Everest base camp at an altitude of 5200 meters The performance and high quality of the whole vehicle have been brought into full play in this strict test. The test drivers and R&D engineers witnessed the excellent performance and reliable quality of V&T electric drive controller. When the charging supporting facilities in the field of domestic new energy e-mobility vehicles are...
A few days ago, equipped with V&T E-drive motor controllers, XCMG heavy truck battery electric mining dump trucks were officially sent to the southwest mines in batches. The total order amount is about 16 million yuan. It meets the special needs of mining customers for product performance and various complex working conditions. let the concept of "green mines" go one step further. The battery E-truck vehicle continues the unique advantages of XCMG heavy truck fuel type mining truck. The high-strength cargo box, composite girder, and integrated body have super load capacity. The gear self-learning and power-off self-learning can effectively eliminate deviations caused by wear of the gearbox after long-term use. It makes shifting more accurate and smooth. During the whole life cycle, the car does not need to re-calibrate the software under various conditions such as flat ground, uphill and downhill, wading, etc., With safe and reliable vehicle performance, adjustable air cushion seat, high toughness and durable leaf spring, wide field of vision, the vehicles have entirely improved the comfort of motor driving. Battery electric mining dump trucks are more unique in energy saving, environmental protection, clean and low noise characteristics. The unique motor braking system has an energy recovery rate of more than 10%, and the system efficiency is greater than 80% in the high efficiency zone under full operating conditions. The vehicle uses more advanced control logic to optimize the overall efficiency of motors, gearboxes, and batteries, and saves more than 5% energy than similar products. For repeated operation routes, it optimizes energy distribution and shift points by collecting large data on vehicle dynamics. The energy saving effect is more obvious. For the key points of many new energy products such as battery life and power, XCMG heavy truck's battery electric mining dump trucks have performed more robustly. With a safe and efficient lithium iron phosphate battery, the truck has a super-large configuration of nearly 200 kW.h power, supplemented by precise control strategies. The vehicle has excellent endurance. The starting torque is up to 18000N.m, and the acceleration time from 0 to 50 km / h is less than 20 seconds. The dual intermediate shaft 7-speed gearbox has passed the rigorous test of a 100-ton mine truck. It has less heat, high efficiency, and simple structure. According to different slopes and vehicle weights, the vehicle automatically selects the appropriate gear to ensure sufficient torque. the comprehensive gradient exceeds 45%, and the vehicle's gradient is still greater than 30% under heavy and full load conditions, which can easily handle the complex geographical conditions of the mine. Since Shenzhen V&T Technologies Co.,Ltd. provided the electronic control drive system package for the “Ten Cities, Thousand Vehicles” New Energy Vehicle Promotion and Application Demonstration Project in 2009, it has accompanied the d...
Recently, more than 60 supplier representatives gathered to participate in the supplier conference with the theme of "pairing and cooperation between KingLong and suppliers". As the supplier representative, Shenzhen V&T Technologies Co.,Ltd signed relative cooperation agreements with KingLong technology department and KingLong quality management department respectively, which demonstrated the determination of V&T and KingLong to jointly tackle tough problems and improve quality. The three parties will make concerted efforts and collaborative breakthroughs to jointly build a high-quality supply chain and guarantee KingLong battery Vehicles. For Shenzhen V&T Technologies Co.,Ltd ( Part of Electric Vehicle Motor Controller ) Established in 2006, Shenzhen V&T Technologies Co.,Ltd. is a well-known supplier of industrial automation and new energy electric control products. In 2016, it was listed on the Growth Enterprise Market of the Shenzhen Stock Exchange (stock code: 300484). The headquarter locates in Shenzhen, and has two R&D centers in Shenzhen and Wuxi, as well as the Guangdong New Energy Vehicle Drive and Control Engineering Technology Research Center, the Postdoctoral Innovation Practice Base, and the BYD Semiconductor Joint Innovation Laboratory. The company has over ten years of platform technology accumulation and rich application experience in the automotive industry. The supporting products include: main drive electric control, auxiliary drive electric control and all-in-one integrated electric control etc. The product power ranges from 1kW to 355kW, providing various electric drive control system solutions such as battery electric vehicles, hybrid vehicles, and fuel cell vehicles, covering the needs of commercial vehicles, passenger vehicles, special vehicles and other automotive applications. The company enjoys high customer’s trust and industry reputation, and directly or indirectly serves dozens of well-known domestic new energy vehicle companies, such as FOTON, SUNWIN, DONG FENG, KING LONG, HIGER, SANY, ZOOMLION, GOLDEN DRAGON, ANKAI, XCMG MACHINERY, SKYWELL, CAMC, SHAANXI AUTOMOBILE, BYD etc.
On December 4, Qiu Wenyuan, Chairman of V&T, warmly received the president and project leader from Indian IPLT company in Shenzhen. Previously, mainstream media in the United States, Japan, India and other countries have reported on the first Indian 60-ton battery electric truck successfully developed by IPLT recently and this battery electric heavy truck is equipped with V&T E-drive motor control system. Chairman from V&T and IPLT’s President Green environmental protection and economic transportation environment have been valued by the Indian government and enterprises. In particular, traditional heavy-duty trucks have a large fuel consumption, high oil prices and dependence on imported resources, while battery electric heavy-duty trucks have lower operating costs and can generate huge economic benefits. It has attracted Indian companies to start investing in the research and development of battery E-truck. At the same time, it has also accelerated the pace of introducing advanced motor drives control systems, products and technologies from China. IPLT is a large-scale medium-range transportation operator in India. It is also an automobile manufacturing system integrator and automobile manufacturer. It mainly develops and manufactures battery electric heavy trucks. V&T is an important partner of IPLT. With superb technology and close cooperation between the two parties, it has successfully completed the development of India's first 60-ton battery electric heavy truck in a short period of time, which is more faster than that of most major manufacturers in India. It is a milestone for IPLT company and India. As a result, it has received praise among the Indian industry, and has been widely concerned and reported by Indian domestic and international media. (The following materials are provided by customers). CNBC, the world's leading financial media Japanese TV-japan Indian Economic Times Weekly … Excerpt from more than 20 minutes of CNBC prime time in the United States Screenshot of Indian Economic Times Weekly Report Screenshot of Japanese TV-japan report Screenshots of other media reports The electrical vehicle motor control system provided by V&T and its excellent performance left a deep impression on the IPLT team and gave thumbs up and praise! Superior performance, continuous and stable high-power operation, safe and reliable, free switching between electric and power generation. IPLT president highly praises V&T’s electrical vehicle motor control system V&T has a rich and complete product series to meet the application of various models such as passenger cars, logistics vehicles, special vehicles, special vehicles, commercial vehicles, etc., and has been accompanied by the development of China's new energy vehicle industry for more than a decade, and has achieved remarkable results Grades. Today, V&T’s excellent e-mobility motor drive control systems and products are exported directly or through domestic OEMs ...
On December 3, the results of the 2019 fuel cell bus project bidding in Nanhai District, Foshan City, Guangdong, were announced. 426 million orders. It is reported that this is the world's largest bid for hydrogen fueled buses ( hydrogen fueled buses drive system) at onetime (Source:YunNanNewspaper). With equipped with all-in-one V&T integrated motor controller, YunNan WuLong hydrogen fuel cell bus has the characteristics of fast hydrogenation, large capacity, zero emissions, pollution-free, etc. At the same time, in terms of long distance, heavy load, and environmental adaptability, It has certain advantages. Shenzhen V&T Technologies Co.,Ltd. follows the quality system standards of the automotive industry from design, development, testing, production, and inspection. The products comprehensively cover the application needs of various new energy vehicles such as pure electric, hybrid, extended range, hydrogen fuel vehicles, etc., providing more high-quality products and solutions for vehicle companies, system integrators and partners, winning more and more attention and recognition of customers in the industry. Shenzhen V&T Technologies Co.,Ltd. is a listed company on the GEM (stock code 300484), a national high-tech enterprise and software company. It is well-known in the industry for its products and solutions in the power electronics fields such as EV motor controllers, low and medium voltage AC Drives/inverters/VSD/VFD and servo drives. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it was successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-doctoral innovation practice base. With two R & D centers in Shenzhen city and Wuxi city, It is based on independent technology research development and product innovation, keeping up with the world's advanced level. The main drive motor controller, auxiliary drive electronic control and all-in-one integrated electronic control, customized products series etc, realize the best matching of electric vehicle power system and vehicle system, also covers application requirements of commercial vehicles, passenger vehicles, special vehicles. They provide customers with excellent electric control system solutions for Battery electric vehicles, extended range vehicles, fuel cell vehicles to create more value. The company enjoys high customer’s trust and industry reputation, and directly or indirectly serves dozens of well-known domestic new energy vehicle c...
General Manager Mr. Qiu Wenyuan and R & D technicians accompanied Secretary-General Wang and his party to visit the production line, R & D center, laboratory, exhibition hall etc. Secretary-General Wang highly recognized V&T's electronic motor controller products. Over the years, he has given great support and assistance to our work in the field of new energy electric vehicles. In 2009, V&T became the supplier of Xiamen Golden Travel, and signed the first contract for "Hybrid Bus Motor Controller" with Xiamen Golden Travel, which is a milestone for the company's development and fully demonstrates V&T's new foothold In the field of energy vehicles, it is necessary to establish a firm determination to become a first-class supplier. The company provides high-quality E-drive motor control products for the "Ten Cities and Thousand Vehicles" project. It has supplied more than 6,000 hybrid buses to many car factories such as Jinlu, Jinlong, Shenwo, Ankai, etc., and it has been used in Hangzhou, Qingdao, Xiamen, Urumqi, Haikou, etc. which operating steadily for nearly 700,000 kilometers for 9-10 years. The outstanding performance of the product in terms of safety, reliability and service life left a deep impression on Secretary-General Wang. Picture 2 Xiamen Golden Travel Bus supporting V&T Electronic Control in 2009 (taken by Hangzhou Public Transport Group in May 2018) Picture 3 Nameplate of Xiamen Golden Travel Bus supporting V&T E-drive control system in 2009 (taken by Hangzhou Public Transport Group in May 2018) Picture 4 The Xiamen Golden Travel Bus instrument panel supporting V&T EV motor controller in 2009, which has operated a total of 689,271 kilometers as of May 2018 (taken by Hangzhou Bus Group in May 2018) V&T has established long-term cooperative relationships with many well-known car companies and system integrators by continuously improving the professional quality and brand influence of its products. The product power range is 3kW ~ 355kW, and it is widely used in various e-mobility models such as passenger cars, logistics vehicles, special vehicles, special vehicles, commercial cars and so on. It has better technical advantages and reputation in the industry, has won the attention and recognition of more and more customers in the industry, and has accumulated rich experience for enterprise development. Secretary-General Wang fully affirmed V&T's excellent achievements in the field of E-vehicles, and hopes that the company will continue to make full use of its advantages and develop faster and better. V&T thanked Secretary-General Wang for his strong support and will continue to give back to our customers with excellent electrical drive control products, and contribute to the construction of a safe, green and environmentally friendly travel and transportation environment for the society! ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2...
It is golden autumn of October and rich fruits are in heaps. Recently, in order to achieve two side’s complementary advantages, equality and mutual benefit, and win-win cooperation, Shenzhen V&T Technology Co., Ltd. and Jiangsu Jiankang Automotive Co., Ltd. have reached strategic cooperation in the field of new energy vehicles electric control. Jiangsu Jiankang Automotive Co., Ltd. is a new energy automobile enterprise integrating R&D, production and sales with new energy electric buses, hybrid power and electric logistics vehicles, cold chain vehicles and sanitation vehicles. Shenzhen V&T Technology Co., Ltd. is a high-tech enterprise with completely independent intellectual property rights, specializing in R&D technology, manufacturing, sales and service of e-mobility motor drives controllers, medium and low voltage frequency inverters and servo drives. V&T brings together the elites of the new energy vehicle industry. As early as 2008, it just opened the road of research and development of new energy vehicle motor controllers. After over ten years of technology precipitation, it has full coverage of the major energy vehicle factories, with complete model range for new energy bus, logistics vehicles and passenger vehicles. By its outstanding performance in terms of safety, reliability and service life, V&T has won numerous honors and awards in the new energy vehicle professional competition and industry technology competition. V&T accept good industry brand reputation and widely acclaim from customers. We get strategic cooperation based on two company’s deeper understanding and mutual trust. Both two sides reached an agreement for deepen cooperation in the new energy automobile industry products, make full use of their respective advantages, and strive to achieve excellent matching between products and market strategy. V&T provides power assembly solutions to Jiankang with safer and more environmentally-friendly electric motor control products and technical training for automotive after-sales technicians. We believe this strategic cooperation will promote the solidarity between two companies. By two side’s advantages in market, technology and after-sales, we provide quality products and services to strategic partners, and more competitive products to customers. The cooperation will promote further development and growth of both sides and contribute to the contribution of society. At the same time, it will also comprehensively enhance the industry influence and popularity of V&T and Jiankang! V&T’s Director, Deputy General Manager Xu Xuehai, Jiankang’s General Manager Zhang Yue, and some representatives from both sides attended the strategic cooperation ceremony. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enter...
After successfully applying to international markets such as Spain, Italy, Pakistan, the Philippines, Egypt, and India, V&T’s Electric Vehicle Motor Controller has recently entered into Korean market. Rely on the“One Belt, One Road”initiative, cooperation between Chinese and Korean companies is deeper and deeper. Recently, the Korean E-Bus equipped with V&T EV motor controller has successfully completed the commissioning in Korea and passed the customer's acceptance, which has been praised and recognized by customers. V&T’s electric vehicle motor controller All commissioning work was carried out in an orderly manner and completed efficiently through teamwork. During the test, V&T E-drives motor controller runs smoothly and has excellent performance, which help customers successfully complete all test items of the vehicle. Due to the large number of mountain roads in Korea, customers pay special attention to the machine’s climbing performance. In the multi-curve, high-altitude continuous climbing test, the vehicle performed outstandingly and easily climbed the mountain at an altitude of about 1200 meters to meet the application requirements under high-altitude mountainous environment. Korean customer’s part site inspection site picture It just a small step in V&T’s internationalization strategy through e-mobility drive motor controller products enter into Korean market. We will continue to deepen our overseas markets and provide our customers with better products and services by virtue of their outstanding performance in terms of safety, reliability and service life. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it was successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-doctoral innovation practice base. With two R & D centers in Shenzhen city and Wuxi city, It is based on independent technology research development and product innovation, keeping up with the world's advanced level. The main drive motor controller, auxiliary drive electronic control and all-in-one integrated electronic control, customized products series etc, realize the best matching of electric vehicle power system and vehicle system, also covers application requirements of commercial vehicles, passenger vehicles, special vehicles. They provide customers with excellent electric control system solutions for Battery electric vehicles, extended range vehicles, fuel cell vehicles to create more value. The company enjoys h...
As a newcomer in the Internet age, online car has changed people's traditional travel modes and brought new opportunities for the development of electric vehicles. On August 24, 2019, the 2019 Second National Net Car Travel Conference (referred to as the Net Car Travel Conference) officially came to an end. The current net car travel conference was hosted by the Guangdong Automobile Rental Industry Association. More than 600 people participated in the industry event. As a national high-tech enterprise with completely independent intellectual property rights, V&T brings together the elites of the industry. After more than ten years of technology precipitation, It has a complete products covering all major automakers, new energy buses, logistics vehicles, passenger cars and other models etc. With its outstanding performance in safety, reliability and service life, Shenzhen V&T Technologies Co.,Ltd. has won many honors and awards in the new energy vehicle professional competition and industry technology competition! In this award ceremony of the online travel conference, V&T was awarded the “Best Net Car Travel Supporting Enterprise Award”. Shenzhen V&T Technologies Co.,Ltd., practicing the “National New Energy Strategy”, is committed to promoting the development of new energy industry and industrial automation drive, and is committed to providing safer and more environmentally friendly powertrain drive solutions for all types of electric vehicle manufacturers and system manufacturers. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it was successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-doctoral innovation practice base. With two R & D centers in Shenzhen city and Wuxi city, It is based on independent technology research development and product innovation, keeping up with the world's advanced level. The main drive motor controller, auxiliary drive electronic control and all-in-one integrated electronic control, customized products series etc, realize the best matching of electric vehicle power system and vehicle system, also covers application requirements of commercial vehicles, passenger vehicles, special vehicles. They provide customers with excellent electric control system solutions for Battery electric vehicles, extended range vehicles, fuel cell vehicles to create more value. The company enjoys high customer’s trust and industry reputation, and directly or indirectly serves dozens of...
It is reported that the ChiShui River bridge connects the XuGu highway and XiGu highway. The total length of the bridge is 2009 meters, with the main span as long as 1200 meters and the height of 228 meters and about 70 floors.The bridge is the largest span in Asia bridge under the same type.The world's second - and tallest suspension bridge between mountains will be completed by the end of 2019. The frequency converter (VSD/VFD/Inverters/AC Drives) in the hoist equipment used for lifting construction materials is the high performance hoist/gantry crane frequency drives of Shenzhen V&T Technologies Co.,Ltd. The main engine power is 315kW and auxiliary power is 37kW, all of which are equipped with the variable frequency drives (VFDs) for hoisting machine. After the equipment was sent to ChiShui River bridge, the company arranged a professional technical team to actively discuss with the construction team on the basis of the actual use, so as to make best matching. Shenzhen V&T Technologies Co.,Ltd. has been highly recognized by the field construction team for its excellent torque vector performance, high stability and reliability, and conscientious responsible service attitude of the technical team. In recent years, China's high-speed rail, subway and highway construction is in full swing. Shenzhen V&T Technologies Co.,Ltd. products have been successively used in the rail transit construction in Beijing, Xi 'an, Guangzhou, Foshan and other places, as well as supporting equipment such as hoist, industrial and mining truck tractor, slag extractor and tower crane. We will be more better to help industrial construction with support of market. ⬛ For Shenzhen V&T Technologies Co., Ltd. Shenzhen V&T Technologies Co., Ltd. was certificated as a "National Hi-tech and Double-Software Enterprise", which has fully intellectual property rights and devotes to the R&D, manufacture, sales and technical service of Inverter, Servo Drive, Electric Vehicle Motor Controller, etc. V&T has won the “Technical Innovation” prize awarded by the Inverter Industry Association, “The Most Competitive Brands” prize awarded by China Electrical Association, "2012 Electric Vehicle Excellent Technology" prize respectively awarded by China Electric-technical Society (CES), the Specialized Committee of Electric Vehicles, the Automotive Engineering Society of China, and theBranch Association of Electric Vehicles. V&T has been ranked as one of the “Top 10 Chinese Inverter Enterprises”. V&T successfully listed on the Stock Exchange of China in 2016 (stock code: 300484). The company masters the core control technology of motor drive, and has complete industrial design and production capacity. It has a rich product series. The voltage level covers 200V, 400V, 690V, 1140V, and power range covers 0.4kW～3000kW, which can meet various Application requirements of high-end, medium-end, and low-end markets. Under the premise of meeting international standards a...
Recently, the mayor of Guangming District of Shenzhen, Liu Sheng, and his colleagues came to V&T company to guide our work. Qiu Wenyuan, chairman of our company, accompanied Mr. Liu and his delegation to visit the company's exhibition hall and production workshop, and gave detailed and professional answers to Mr. Liu's questions about production process, company R&D and production situation. At the subsequent symposium, on behalf of Guangming District Party Committee and Government, Mr. Liu affirmed and welcomed the development of V&T to Guangming, and was concerned about asking relative the difficulties encountered by the company in process of operation and the problems that need government assistance to solve. President Mr. Qiu first reported to the district leaders on the actual development of the company, and put forward the current problems and needs that need the assistance of relevant departments from the aspects of industrial space lands, employees' settled down and children's education. In response to the needs put forward by the company, Mr. Liu responded to the on-site coordination of the relevant persons in charge of the district and the street departments, and said that the relevant departments of Guangming district would actively give advice and solve problems for the development of enterprise. Finally, Mr. Liu has high hopes and expectations for V&T to actively participate in the construction of Guangming District, and earnestly expects the company to take advantage of Guangming district's all-round policies and good location advantages to enhance development confidence, give full play to its potential, strive to become bigger and stronger, and become a powerful lever to help Guangming District build the development strategy of "four cities and two districts". In the face of Guangming's new development orientation of "building a world-class science city and the northern center of Shenzhen", V&T will grasp the planning focus, constantly consolidate the strength of the enterprise, actively cooperate with the development planning and policies of the government, utilize better development space, and help promote the high-quality leaping development of Guangming district's economy and society. Thank the leaders of Guangming district for their care and support. For Shenzhen V&T Technologies Co., Ltd. Shenzhen V&T Technologies Co., Ltd. was certificated as a "National Hi-tech and Double-Software Enterprise", which has fully intellectual property rights and devotes to the R&D, manufacture, sales and technical service of variable frequency drive (VFD/VSD), AC Inverter (AC Drive), AC Servo Drive, Electric Vehicle Motor Controller, etc. V&T has won the “Technical Innovation” prize awarded by the Inverter Industry Association, “The Most Competitive Brands” prize awarded by China Electrical Association, "2012 Electric Vehicle Excellent Technology" prize respectively awarded by China Electric-technical So...
The 16th China Straits Project Achievements Fair was held in Fuzhou Strait International Convention and Exhibition Center from June 18th to 21th, 2018. The exhibition booth covers an area of 80,000 square meters, with more than 1,500 enterprises participating in the exhibition. Shenzhen V&T Technologies Co.,Ltd., as the leading supplier of new energy electric vehicle motor controller in China, was invited to the exhibition. At the exhibition, the V&T MCU motor controller, auxiliary motor controller, multi-in-one integrated product and vehicle powertrain system developed by Shenzhen V&T Technologies Co.,Ltd. are presented. The audience is attracted to the show, which is highly praised by professional media. It integrates many advantages including advanced vector control technology into EV motor controller, so it has more excellent dual control, higher efficiency of system at least 98%, perfect intelligent control and humanized fault memory function, etc. The multi-in-one product pioneered by the company not only reduces the installation space and wiring harness for the E-vehicle, reduces weight and cost, but also greatly improves the safety and reliability of the vehicle and becomes the mainstream application. In 2008, Shenzhen V&T Technologies Co.,Ltd. started the research and development of new energy electric vehicle controllers. After more than 10 years of technical precipitation, it has a complete product line covering all mainstream new energy buses, logistics vehicles, passenger vehicles and other models in auto plants By December 2017, more than 200,000 new energy controllers have been equipped on various hybrid and pure electric models in many mainstream domestic car plants. Shenzhen V&T implements the "national new energy" development strategy, and takes the development of new energy and industrial automation motor drives as its own responsibility. We are committed to providing all new energy vehicles complete vehicle factories and system manufacturers with safer and more green power assembly solutions. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Well-known Supplier of Electric Vehicle Motor Controller ) V&T Founded in 2006. it is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-doctoral innovation practice base. With two R & D centers in Shenzhen city and Wuxi city, It is based on independent technology research development and product innovation, keeping up with the world's advanced level. The main drive motor controller, auxili...
The advent and successful application of a new energy mining motor controller for V&T has greatly reduced the mining and transportation costs of the mine and installed a new engine for the development of the mining industry. Wide-body mining truck is a heavy-duty truck used in large open-pit mines to complete the tasks of rock and earth stripping and ore transportation. It travels between mining sites and unloading sites, also has the characteristics of short transportation distance and heavy load. Fuel consumption accounts for about 60% to 80% of the total transportation cost. How to control the fuel cost has become a key issue that determines the profit and loss of the transportation industry. In June 2017, a new energy mining truck motor controllers were successfully used in batches in a domestic hybrid "Big Mac" mining vehicle. The advent and successful application of it greatly reduced the mining and transportation costs of the mine and installed a new engine for the development of the mining industry. The "Big Mac" mining truck is equipped with V&T E-drive motor controller, combined with a four-in-one integrated controller, which integrates the Special-Purposed vehicles functions of MCU, oil pump, air pump, high voltage distribution, DCDC, brake power generation feedback and charging. high power density meets the features of large torque of the drive motor at low speed, also requirements of climbing and downhill braking power generation with heavy load. It realizes safe and efficient operation in different regions under all weather conditions. As the mining depth of open-pit mines growing year by year, the phenomenon of large slopes and multiple bends makes the difficulty of mine operations increasing. Near 50% of a transportation cycle is uphill and 50% is downhill. During the heavy-duty downhill braking process, the new energy mine trucks use V&T motor controller to feedback the power generation to achieve energy recovery, also save energy and reduce power consumption by about half compared to traditional vehicles. The future development of electric wide-body mine trucks is huge. Shenzhen V&T Technologies Co.,Ltd. is willing to use its excellent wide-body mine truck electric control solutions and successful application experience to make new contributions to the construction of "green" mines in China! ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Part of Electric Vehicle Motor Controller ) Founded in 2006, V&T is a well-known supplier of industrial automation control and new energy vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it was successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial e...
On May 8-11, 2018, the 13th China International Elevator Exhibition kicked off at the Shanghai International Convention and Exhibition Center. From more than 20 countries, over 1300 elite companies in the elevator industry gathered here. This is a The stadium declared to the world the grand event of the vitality of the elevator industry, attracting more than 120,000 spectators from all sides. Tidal flat across the shore, the wind is hanging. Shenzhen V&T Technologies Co.,Ltd., with its rich experience and solid strength in the industrial control industry for 12 years, made its debut in the elevator industry. Close to the needs of customers, create high-quality electronic control. A good product is not just the crystallization of technology, it is more like an artwork that is close to the needs of customers. Through this exhibition, V&T has conducted two-way communication with numerous professionals in the industry and has conducted in-depth analysis and summary of customer needs in the field of elevator drive control. We always believe that technological innovation will ultimately reach the people. Nowadays, most of the electronic drive control in the elevator industry is monopolized by foreign capital, and the domestic market share is only about 40%. Faced with such a severe market situation, V&T has sincerely cooperated with the elite companies related to the elevator industry to seek a healthier and more efficient market. Diversified cooperation model, with colleagues in the industry in the elevator "China made wisdom" on the way forward! If the goal is not put into action, then all plans are just slogans. There are actually many things that we can do to achieve environmental protection. To fulfill the green environmental protection obligations, V&T will work with you to start from the side of your life. The wonderful time is always short. The four-day exhibition has come to an end. We learned a lot from James and won ten years of books. In such a high-quality and high-level exchange event, we have learned a lot. We intuitively feel the rapid development of the vitality of the elevator industry today, and more closely understand the customer needs of the elevator market. Shenzhen V&T Technologies Co.,Ltd. has been adhering to the field of industrial control and has been deeply cultivating the spirit of artisans for 12 years. With a wealth of experience in product field supporting applications, it has the ability and confidence to continue to innovate breakthroughs in the field of elevator inverter system control, achieve brilliant achievements, and provide customers with smarter, safer, more energy-efficient products. Comfortable, more close to the customer's needs of the elevator electronic control system. In 2020, Shanghai National Convention and Exhibition Center, we look forward to seeing you again! ⬛ For Shenzhen V&T Technologies Co., Ltd. Shenzhen V&T Technologies Co., Ltd. was certificated as a "Nationa...
Every insistence comes from the tireless pursuit of technology; Every attention is focused on the enthusiasm of technology; Every approval from you encourages us to move forward! March 16, 2018, sponsored by gongkong, co-organized by OPC (China) Foundation and China Industrial Standards Technology Alliance, and supported by the Institute of Instrumental and Integrated Technology and Economics of Machinery Industry and International Cooperation Committee of Intelligent Manufacturing Industry. The 2018 China Automation and Intelligent Manufacturing Services Annual Conference was held in Beijing. Shenzhen V&T Technologies Co.,Ltd. takes “2017 CAIMRS Enterprise Development Breakthrough Award” into its pocket with its excellent performance in the field of industrial drive control. As the longest history in domestic industrial automation industry, the most extensive audience, the most open process, and the most impartial result of the election, it took more than two months, combined with user voting, market research, big data analysis, and expert selection, to obtain a comprehensive evaluation result. V&T can stand out among many competitors, and is the recognition of our brand strength by the industrial control industry experts and the majority of users. Good news|everything received from you encourages us to move forward! With the forward-looking knowledge of industrial control industries, V&T has focused on professional high-end applications and complete motor drive system solution providers in the field of traditional industrial control. Its product applications cover many industries in the field of industrial control. As one of the earliest companies to enter the field of electric vehicle electric control in China, the company successfully seized the opportunity for the development of new energy vehicles in China. More than 200,000 sets of E-Vehicles China motor controllers have been successfully used in many mainstream car manufacturers. In the future, in the face of severe challenges, we will continue to innovate and improve, and strive to advance on the road of pursuit and transcendence! ⬛ For Shenzhen V&T Technologies Co., Ltd. Shenzhen V&T Technologies Co., Ltd. was certificated as a "National Hi-tech and Double-Software Enterprise", which has fully intellectual property rights and devotes to the R&D, manufacture, sales and technical service of Inverter, Servo Drive, Electric Vehicle Motor Controller, etc. V&T has won the “Technical Innovation” prize awarded by the Inverter Industry Association, “The Most Competitive Brands” prize awarded by China Electrical Association, "2012 Electric Vehicle Excellent Technology" prize respectively awarded by China Electric-technical Society (CES), the Specialized Committee of Electric Vehicles, the Automotive Engineering Society of China, and theBranch Association of Electric Vehicles. V&T has been ranked as one of the “Top 10 Chinese Inverter Enterprises”. V&T successfu...
The first China New Energy Vehicle Industry peak summit BBS was grandly held at the XiYue Hotel in Chengdu from Jan 17 to 18, 2018. Centering on the theme of "New situation, New challenge and new opportunity in China's New Energy Vehicle Industry ", senior government officials, experts and scholars, and executives of mainstream enterprises, chief engineers and other thousands of elites in industry expect the future evolution and innovative development direction of new energy vehicle industrial policies, technologies, marketing models and other aspects. During the same period, Shenzhen V&T Technologies Co.,Ltd. attends the “China New Energy Vehicle industry annual award ceremony” (namely "Golden Panda Award"), grabs the "Best Supporting Products award" in China new energy vehicle industry. With the principles of "fairness, openness and justice", the second selection in 2017 has selected enterprises with universal credibility and representativeness through online selection and expert evaluation over a period of more than 20 days. Shenzhen V&T Technologies Co.,Ltd. stands out in the competition with its excellent performance and supreme user experience. Above all, Shenzhen V&T has grabbed the "Gold Panda Prize", an authoritative and representative award in the E-mobility components field. As the three core components of motor, battery and electric controller supplier of New Energy Vehicle, Shenzhen V&T Technologies Co.,Ltd. has successfully seized a good opportunity in China with rapid development of new energy vehicles industry. Electric controller’s sale makes a breakthrough over 200,000 sets. It has been successfully applied to many mainstream automobile factories in China and has become a mainstream supplier of motor controller for New Energy Vehicle in China. Under the general trend of the development of new energy industry in the future, Shenzhen V&T will continue to fulfill its commitment of environmental protection, and practice green development to facilitate China's new energy industry. ⬛ For Shenzhen V&T Technologies Co.,Ltd. ( Well-known Supplier of Electric Vehicle Motor Controller ) V&T Founded in 2006. it is a well-known supplier of industrial automation control and E-vehicle motor controllers, also a national high-tech enterprise. Headquartered in Shenzhen, it successfully listed on the Shenzhen Stock Exchange's Growth Enterprise Market in 2016 (stock code: 300484). The company has more than ten years of technology accumulation and rich industry application experience. It has established “Research Center of Guangdong New Energy Vehicle Drive and Control Engineering Technology”(provincial engineering center) and a post-doctoral innovation practice base. With two R & D centers in Shenzhen city and Wuxi city, It is based on independent technology research development and product innovation, keeping up with the world's advanced level. The main drive motor controller, auxiliary drive electronic control and ...
From December 13 to December 16，2017, the four-day China Crane Technology Academic Innovation Development Conference was held at Ramada Plaza Wuxi, Jiangsu Province. China lifting machinery technology academic innovation and development conference was successfully held With the theme of "innovation-driven development and technology leading the future", more than 300 leading experts in the lifting industry gathered here to recall the stormy history of heavy industry and to seek common solutions for the future development of the lifting industry. The General Assembly began by Jiangsu Province Special Equipment Safety Supervision and Inspection Institute Dean Wang Donghua welcome speech. Yang Bailan, former vice president of the Chinese Academy of Sciences and the 10th NPC Standing Committee, mentioned that only by understanding the trend of science and technology can we win the initiative in innovation and development. China Special Equipment Safety and Energy Promotion Association, director of promotion Sun Jian Tao, lifting the future development of the industry need to integrate industrial automation drive factory Internet technology. Since the concept of "German Industry 4.0" and "Made in China 2025", the development of industrial intelligence is imperative. Shenzhen V&T Technologies Co.,Ltd. as a domestic lifting inverter industry excellence enterprises invited to attend the conference. Jiang Zhongwen, deputy general manager around the "V&T and lifting intelligence", expounds the Shenzhen V&T Technologies Co.,Ltd. lifting industry intelligent direction of a profound interpretation and reflection. During the meeting, CCTV10 column interviewed Shenzhen V&T Technologies Co.,Ltd. 10 years, 3650 days and nights, 876000 hours, 3504000 engraved, 5256000 minutes. Some people choose mediocrity, wastd years. Some people choose flat and steady, steady. Bit by bit accumulation, it seems meaningless, But can inadvertently affect the future. V&T selected inverter industry, cultivating more than ten years, The product continues to carry out multi-level, Multi-field and forward-looking technology development, Products successfully applied to many industries, Sales and service network covering dozens of countries and regions, Widely by the user's praise, We will work hard to become an excellent company in the inverter industry. For the lifting industry, V&T persistent, continuous innovation. In the future, V&T products will become more intelligent. We will only be more professional! For Shenzhen V&T Technologies Co., Ltd. Shenzhen V&T Technologies Co.,Ltd. is a listed company on shenzhen Stock Exchange Center,Stock code is 300484. V&T Company is certificated as a “National Hi-tech enterprise” and “Double-software enterprise”, which has fully intellectual property rights and devotes to the R&D, manufacture, sales and technical service of Frequency Inverter(Variable frequency drive) , Servo Drives, ...
The 18th Shanghai international textile industry exhibition has been held from Nov 27 to 30,2017 in Shanghai Pudong New Area.More than 1,200 textile machinery enterprises from 26 countries and regions gather here to discuss business. With numerous self-developed family products and efficient textile industrial drive control solutions, Shenzhen V&T Technologies Co.,Ltd. has attended to this exhibition. As a "national high-tech enterprise" and "software enterprise" specialized in the field of power electronic products, We not only bring high-performance vector control frequency inverter V6-H, miniaturized FV20-M mini vector frequency converter, V61 synchronous servo driver, VA-M (machine tool drive) dedicated spindle servo driver, V51-BA textile special driver, V6-GH lifting frequency drives, also demonstrated our V6-H-4D five-in-one integrated motor controller product. With rapid progress of industrial and control integration scheme, we also bring the solutions of double twist machine, spinning machine, air compressor and dividing and warping machine in textile industry. With the proposal of made in China 2025, we have a better understanding of the changes in the demand of customers in the textile industry and have an insight into the industrial control trend of the textile industry. Centering on customer needs, we will offer sustained and effective output in the industrial control field of the textile industry. ⬛ For Shenzhen V&T Technologies Co., Ltd. Shenzhen V&T Technologies Co., Ltd. was certificated as a "National Hi-tech and Double-Software Enterprise", which has fully intellectual property rights and devotes to the R&D, manufacture, sales and technical service of Inverter, Servo Drive, Electric Vehicle Motor Controller, etc. V&T has won the “Technical Innovation” prize awarded by the Inverter Industry Association, “The Most Competitive Brands” prize awarded by China Electrical Association, "2012 Electric Vehicle Excellent Technology" prize respectively awarded by China Electric-technical Society (CES), the Specialized Committee of Electric Vehicles, the Automotive Engineering Society of China, and theBranch Association of Electric Vehicles. V&T has been ranked as one of the “Top 10 Chinese Inverter Enterprises”. V&T successfully listed on the Stock Exchange of China in 2016 (stock code: 300484). The company masters the core control technology of motor drive, and has complete industrial design and production capacity. It has a rich product series. The voltage level covers 200V, 400V, 690V, 1140V, and power range covers 0.4kW～3000kW, which can meet various Application requirements of high-end, medium-end, and low-end markets. Under the premise of meeting international standards and satisfying different industries' application requirements, we further strengthened product reliability and environment adaptability to suit harsh and extreme environments. Customized product and industrialized design can better mee...
On August 9th to 12th 2017, The 12th India international trade exhibition was ceremoniously held in Mumbai, India. V&T brought innovative technology products and a technological feast at home and abroad visitors and well-known medias. India Automation Expo exhibition attracted nearly a thousand enterprises from dozens of countries and regions around the world. In this exhibition, more and more users learnt about the great performance of V&T’s Electric Motor Drive products, whom shows great interest in our E5, V5 and V6 series high performance vector control and torque control universal variable frequency drives (VFDs), as well as Mini compact FV20-M series, which further improve the brand awareness of the product. There was an endless stream of spectators at the booth, showing a keen interest in V&T products. Throughout the exhibition, All Shenzhen V&T Technologies Co.,Ltd. staffs are enthusiastic for explaining products performance in detail for customers, displaying system and distributing brochures. They were so busy but won the praise by all the visitors, and it is not just recognition of their work, but also recognition of V&T. Under the premise of meeting international standard and satisfying different industries’ application requirements, we further strengthened the product reliability and environment adaptability to suit harsh and extreme environments of India market. Customized product and industrialized design can meet India’s medium and high-end application demands. The products have been widely used in metallurgy, crane, oil, chemicals, machine tools, electric vehicles, metal processing, building materials, stone, wood processing, ceramics, plastics, air compressor, washing machine ,water supply ,air conditioning ,municipal engineering, textile, printing ,mining and other industries. Last but not the least, Shenzhen V&T Technologies Co.,Ltd. made some breakthroughs in India market through this exhibition and local media publicity, and in the meantime, push forward the development of India by making full use of factory automation drive products and technology. ⬛ For Shenzhen V&T Technologies Co., Ltd. Shenzhen V&T Technologies Co., Ltd. was certificated as a "National Hi-tech and Double-Software Enterprise", which has fully intellectual property rights and devotes to the R&D, manufacture, sales and technical service of Frequency Inverter(Variable frequency drive), Servo Drive, Electric Vehicle Motor Controller (E-drive) , Integrated elevator drive etc. V&T has won the “Technical Innovation” prize awarded by the Inverter (AC Drive) Industry Association, “The Most Competitive Brands” prize awarded by China Electrical Association, "2012 Electric Vehicle Excellent Technology" prize respectively awarded by China Electric-technical Society (CES), the Specialized Committee of Electric Vehicles, the Automotive Engineering Society of China, and the Branch Association of Electric Vehicles. V&...
Today's automation systems vary in type. If they are compatible only to a limited extent, it is difficult to meet the needs of user equipment integration and capacity expansion, which restricts the development of automation technology. PROFINET is an Ethernet-based automation standard proposed by PROFIBUS International (PI) and can meet the needs of three automation areas simultaneously in a single industrial Ethernet cable solution, including IT integration, real-time automation And simultaneously implement the field of motion control. The goal is to provide a broad range of manufacturers and users with a unified line of safety technology that meets the needs of standardization of mechanical equipment for the language communication bus. To meet the needs of the development of Industry 4.0, V & T as a global member of the PI Association, special introduced to meet the industrial Ethernet inverter new products. EX-CA13 communication expansion card is a PROFINET industrial Ethernet communication product introduced by Shenzhen V&T Technologies Co.,Ltd., and has the PG card function, which fully meets the stability and real-time requirements of the modern industrial equipment interconnection. More commendable is that it is the first certified by the PI new version of the inverter (frequency drives) products. PROFINET expansion card EX-CA13 V & T new products V & T EX-CA13 communication expansion card for V & T's V5 / V6 / V51 / V61 series of all models, its production is undoubtedly V & T products even more powerful, but also to enhance our industrial automation technology also played a can not be ignored Promote the role. Shenzhen V&T Technologies Co.,Ltd. new products meet all sectors of the full range of customer needs, more importantly, the relative imports of similar brands of products, V & T new products with high cost. In the paper industry, there are many facilities in each process segment, the layout of the scattered features, so the use of Profinet industrial Ethernet network control architecture to configure the system. The system uses the V51-H-PRT Ethernet communication interface and PLC, scheduling computer, monitoring computer communications, to accept the host computer scheduling tasks, and control the normal operation of equipment. Certificate and report PI certification PI test report PROFINET Summit (Beijing Railway Station) site ⬛ For Shenzhen V&T Technologies Co., Ltd. Shenzhen V&T Technologies Co., Ltd. was certificated as a "National Hi-tech and Double-Software Enterprise", which has fully intellectual property rights and devotes to the R&D, manufacture, sales and technical service of Frequency Inverter(Variable frequency drive), Servo Drive, Electric Vehicle Motor Controller (E-drive) , Integrated elevator drive etc. V&T has won the “Technical Innovation” prize awarded by the Inverter (AC Drive) Industry Association, “The Most Competitive Brands” prize awarded by China ...
I. Product Description V&T V5 and V6 series inverter are high performance vector control inverter. The speed-sensorless vector control technology is combined with application characteristics to further intensify the product reliability and environmental adaptability. V&T inverter with large torque upon low frequency and rapid acceleration and deceleration, realizes fast response and applies to application characteristics of machine tool inverter，satisfying processing technic demand of machinery device and improving processing efficiency. II. Industry lectotype and advantage Industry lectotype The advanced speed-sensorless vector control technology is adopted for V5 and V6 series frequency converter. Under open loop vector control，0.25HZ can provide 180％ startup torque and ±0.2％ speed stabilizing accuracy. Under closed loop vector control，0Hz can provide 180% startup torque and ±0.02％ speed stabilizing accuracy. It can attain quite quick response speed for spindle motor to realize its quick start and quick stop. Especially for motor running at lower frequency，its rapidity in start and stop is more evident. V5 – H series inverter with vector control 1 and vector control 2 control mode, should be selected for general machine tool to perform work piece processing, with stable and large cutting force. The rigidity tapping and other thread processing industries require high processing velocity accuracy and large tapping force. V6–H inverter is adopted as an actuating mechanism; it can commendably satisfy demands of such industries. For high speed engraving and milling machine with running frequency exceeding 300HZ, V5–H–H3 high-speed nonstandard series products should be adopted, which support maximum output frequency up to 3200Hz. When machine performs high-speed engraving and milling or boring for PCB board，spindle speed is stable, wouldn’t be in off tracking and fall speed, which greatly improves the qualification rate of the machined products. It requires extremely large torque and no stalling when machine tool cutting workpiece at low frequency. The V6–H series inverter should be selected and encoder is needed to perform closed loop vector control mode. Under close loop vector control, the speed stabilizing precision is 10 times than the open loop vector control mode，satisfying the machine spindle processing requirement at low frequency and heavy cutting. V6–H–M0 series products realize orientation angle, 8 angles at most when select by terminal. If more than 8 angles are required, it can be realized by communication to satisfy technics demands of different machining. Under 0Hz running status, spindle accurately stays at the correct angle. The spindle keeps very large torque without changing spindle angle. V6-H-M1 series inverter can realize simple positioning control function and satisfy the application of certain special high-end industry. V6–H series standard products output frequency up to 300HZ. If output frequency exceeds 300Hz under...
Categories
3-8th Floor, Tower 2, Zhiyan lnnovation Building, Yutang Street, Tianliao Community, Guangming District, Shenzhen, Guangdong Province, China.
Ms. Nina
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Copyright © 2024 Shenzhen V&T Technologies Co.,Ltd.. All Rights Reserved. Power by
IPv6 network supported
