V&T Technologies  > 

AI - Page Sitemap

 > 

V&T Technologies V5 series inverter supplier for trader

V&T Technologies V5 series inverter supplier for trader

V&T Technologies V5 series inverter supplier for trader

Delivery Time
With 20 days after deposit
Port of loading
Shenzhen,Shanghai
Sample provide
yes
Sample free
yes
Sample freight payer
buyer
Term of payment
T/T,L/C
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
servo drive has the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to the market demand.Compared with products in the same category, servo drive's core competencies are mainly reflected in the following aspects.
Company Advantages
1. V&T Technologies vector control inverter is produced with mature equipment. We adopt automatic fabric cutting machine and edge folding machine which can make fabric roll into small volume.
2. The product consumes little energy. It has the Energy Star label which is the mark of energy-saving certification, confirming that it will not consume too much energy.
3. The product uses a sturdy construction. It is made of high-density metal and can withstand various elements such as impact and vibration.
4. Shenzhen V&T Technologies Co.Ltd. will focus on vector control inverter, do a good job in V5 series inverter industry.
5. Abundant talent reserves and superior design capabilities for V5 series inverter are the primary force of Shenzhen V&T Technologies Co.Ltd.'s rapid development.

Representative Industry

Oilfield, Explosion-proof Products, Mining Winch, Belt transport machine and so on.


  • Higher saving-energy effect and Less reactive current.

  • Outdoor digital control cabinet, thermostatic control cabinet suit high and low temperature ambient for long-term reliable work..

  • Excellent control performance for open-loop vector control, accurate speed identification and rotor flux orientation, and torque can respond quickly and operate stably at 0.25hz load change.

  • Excellent current and voltage control technology, repeatedly and alternately accelerated and decelerated with 0.1s instruction, and inverter operates stably.

  • Wide voltage range, low voltage under fluctuated power, continuous working, strong adaptability.

  • Convenient and continuous to adjust speed, perfect torque compensation function, normal to start motor with powerful power.

  • Mature power balance scheme can effectively solve power distribution in multi-point transmission.


Product Overview


V&T Technologies V5 series inverter supplier for trader-1

Product Overview

V5-H-6T is a high - performance vector control inverter.
The product adopts the open-loop vector control technology with the current international advanced technology, which has the same excellent control performance with the international high-end driver, At the same time, it is combined with the use characteristics of China, and it further strengthened the reliability and environmental adaptability of the product, as well as the customized and professional design. This greatly meet the needs of various transmission applications.


Model Explanation


V&T Technologies V5 series inverter supplier for trader-2


Product Catalogue


V5−H−6T□□□G  3 Phase 690V Constant Torque/Heavy-duty Applications


Power(kW)

15

18.5

22

30

37

45

55

75

90

110

132

160

185

200

220

Motor(kW)

15

18.5

22

30

37

45

55

75

90

110

132

160

185

200

220

Output

Voltage(V)

3 phase 0~Rated Voltage


Rated Current(A)

20

25

28

35

45

52

65

86

98

120

150

176

204

220

245

Overload capacity

150%  1min,180%  10 second, 200%  0.5 second,interval: 10 minutes (inverse time lag feature)


Input

Voltage/ frequency

3 phase 690V~790V;50Hz/60Hz


Allowable voltage range

587V~793V;Voltage imbalance:≤3% ;allowable frequency fluctuation:±5%


Rated Current(A)

25

30

35

40

47

52

65

85

96

116

145

168

196

210

230

*Braking unit

Built-in as standard

External braking unit  needed


IP

IP20


Cooling mode

Forced air cooling


Power(kW)

250

280

315

355

400

450

500

560

630

 

 

 

 

 

 

Motor(kW)

250

280

315

355

400

450

500

560

630

 

 

 

 

 

 

Output

Voltage(V)

3 phase 0~Rated Voltage


Rated Current(A)

275

325

350

395

435

490

545

600

680

 

 

 

 

 

 

Overload capacity

150%  1min,180%  10 second, 200%  0.5 second,interval: 10 minutes (inverse time lag feature)


Input

Voltage/ frequency

3 phase 690V~790V;50Hz/60Hz


Allowable voltage range

587V~793V;Voltage imbalance:≤3% ;allowable frequency fluctuation:±5%


Rated Current(A)

255

290

335

378

415

466

520

580

655

 

 

 

 

 

 

*Braking unit

External braking unit  needed


IP

IP20


Cooling mode

Forced air cooling




Installation Dimension


V&T Technologies V5 series inverter supplier for trader-3
V&T Technologies V5 series inverter supplier for trader-4

V5−H−6T90G And lower power grade



V&T Technologies V5 series inverter supplier for trader-5
V&T Technologies V5 series inverter supplier for trader-6
V&T Technologies V5 series inverter supplier for trader-7

V5−H−6T110G And higher power grade(accompany with pedestal)



V&T Technologies V5 series inverter supplier for trader-8
V&T Technologies V5 series inverter supplier for trader-9

V5−H−6T110G And higher power grade(no pedestal)



Product appearance, installation dimensions, approximate weight


Voltage

power(kW)

pedestal

Appearance size(mm)

Installation Dimensions(mm)

Weight(kg)

W

H

D

W1

H1

D1

T1

Hole d

690V

15~30

No

285

440

220

200

425

107.5

2.5

7

17

37~55

No

315

575

227

220

553

123.5

2.5

10

25

75~90

No

400

615

265

270

590

123.5

3.0

10

35

110~132

yes

465

1042

325

382

339

238

14

No

465

745

325

343

715

156

3.0

12

55

160~220

yes

540

1206

385

459

365

300

14

No

540

890

385

370

855

205.5

4.0

14

85

250~355

yes

700

1380

385

614

412

294

15

No

700

1010

385

520

977

210

4.0

14

125

400~630

yes

810

1698

425

728

418

339

15

No

810

1358

425

520

1300

210

4.0

14

215

Routine maintenance editor

With the continuous development of the automation field, the application of frequency converters has penetrated into various fields and industries, and the frequency converters are constantly being introduced, with more and more powerful functions and correspondingly higher and higher reliability. However, if it is used improperly, if it is operated incorrectly, or if maintenance is not performed in a timely manner, failures or changes in operating conditions may shorten the service life of the equipment. Therefore, the daily maintenance and repair work is particularly important.

One. Note: The operator must be familiar with the basic working principle and functional characteristics of the inverter, and have basic knowledge of electrician operation. Before inspecting and maintaining the inverter, the main power supply of the equipment must be completely cut off; and wait until the inverter lamp is completely off.

two. Daily inspection items: Check the temperature and humidity of the surrounding environment before the inverter is powered on. If the temperature is too high, it will cause the inverter to overheat and alarm. If it is serious, it will directly cause the inverter power device to be damaged and the circuit to be short-circuited. Causes a direct short circuit inside the inverter. When the inverter is running, pay attention to whether its cooling system is normal, such as: whether the exhaust air is smooth, and whether the fan has abnormal sound. Generally, inverters with a higher protection level, such as inverters with an IP20 or higher, can be installed directly open. Inverters with an IP20 or lower should be installed in a cabinet, so how the heat dissipation effect of the inverter cabinet directly affects the normal operation of the inverter.

three. Regular maintenance Clean the air filter cooling duct and internal dust. Check whether the screws, bolts, and plug-ins are loose, and whether there is a short circuit between the input and output reactors to the ground and the phase resistance, which should normally be greater than several tens of megohms. Whether the conductors and insulators are corroded, if necessary, wipe them clean with alcohol in time. If conditions permit, use an oscilloscope to measure the smoothness of the voltage output from the switching power supply, such as 5V, 12V, 15V, 24V and other voltages. Measure the square wave of each waveform of the drive circuit for distortion. Whether the UVW interphase waveform is a sine wave. If the contact of the contactor has traces of ignition, it is necessary to replace it with a new product of the same model or larger than the original capacity; confirm the correctness of the control voltage and perform a sequence protection operation test; confirm that the protection display circuit is normal; Balance of output voltage during operation. Regular inspections are recommended and should be carried out once a year.

four. Replacement of spare parts The inverter is composed of various components, some of which will gradually degrade and age after long-term work. This is also the main reason for the failure of the inverter. In order to ensure the long-term normal operation of the equipment, the following components should be replaced regularly:

1. Cooling fan The power module of the inverter is the component that generates the most heat. The heat generated by continuous operation must be discharged in time. The life of a general fan is about 10Kh-40Kh. According to the continuous operation of the inverter, the fan should be replaced once every 2-3 years. Direct cooling fans are divided into two lines and three lines. One line of the second line fan is positive, and the other line is negative. Do not connect the fan incorrectly when replacing. There is also a detection wire outside the negative pole. Be careful when replacing it, otherwise it will cause the inverter to overheat. The AC fan is generally divided into 220V and 380V. Do not mistake the voltage level when replacing it.

2. Filter capacitor Intermediate circuit filter capacitor: Also called electrolytic capacitor, its main function is to smooth the DC voltage and absorb the low-frequency harmonics in the DC. The heat generated by its continuous operation plus the heat generated by the inverter itself will speed up the drying of its electrolyte. , Directly affect the size of its capacity. The service life of the capacitor is 5 years under normal conditions. It is recommended to check the capacity of the capacitor at least once a year. Generally, the capacity needs to be replaced if it is reduced by more than 20%.



Company Features
1. Shenzhen V&T Technologies Co.Ltd. is a modern enterprise with first-rate independent research and development on V5 series inverter products.
2. Shenzhen V&T Technologies Co.Ltd. can source raw materials at a low price and use advanced production technologies for V5 series inverter.
3. We are determined to become the leader in the industry and we have strong confidence to accomplish this goal. We will rely on technological innovation and cultivation of the R&D team to optimize our products and strengthen our manufacturing capabilities. We conduct responsible sourcing practices. We endeavor to source our ingredients responsibly and sustainably with respect for local communities and the environment. We always adhere to the principle of running the business in good faith since establishment. Any vicious market competition, such as bidding up prices, offering inferior quality products will be seriously forbidden.
The application of high quality materials did effectively improve the overall appearance of V&T Technologies vector control inverter. The product has a shiny luster and a great color brilliance
V&T Technologies V5 series inverter leaves a lasting impression on the industry with the unique and innovative design. The product is provided with both OEM and ODM service available
vector control inverter is developing toward functional, practical, and decorative types. It can be considerably produced by the highly automatic CNC
The raw material of V&T Technologies V5 series inverter goes through a rigorous selection procedure. The product is manufactured based on highly innovative ideas
The design of V5 series inverter gives customers feelings of vector control inverter. The product has the advantage of rust protection
The popularity of the product comes from its reliable performance and good durability. Materials of the product are environmentally friendly
To guarantee products quality, our factory uses advanced testing equipment. The product has gone through a sound quality control system
The quality of this product is improved under international standards. The product has a shiny luster and a great color brilliance
The performance of this product has been tested time after time. The product is rated as the best quality AAA product
Our vector control inverter is solid and durable enough for long-term use. The product undergoes a strict waxing process
It has been synonymous with high quality and reliable performance. The product undergoes a strict waxing process
The product ensures that the structure or building projects can withstand extreme weather conditions such as typhoon and rainstorm. It is not only suitable for men but also for women
The product doesn't just have a big effect on the environment – it’s also beneficial to the people working within the building as well. The product undergoes a strict waxing process
The product is considered one of the most suitable building materials in warm places as it keeps the interiors cool. The product is rated as the best quality AAA product
The product can stand the test of time. It is incredibly durable to be used in the regions easily susceptible to natural disasters. It can be used widely on many occasions such as parties and weddings
The product is able to yield significant improvements in the comfort and cost-effectiveness of home decoration or building construction projects. It can be used widely on many occasions such as parties and weddings
The low environmental impact of this product shows the improvement in the cost-effectiveness, energy efficiency and comfort of the building. The product has a shiny luster and a great color brilliance
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...