V&T Technologies  > 

AI - Page Sitemap

 > 

V&T Technologies processing vfd motor control for hoist for machines

V&T Technologies processing vfd motor control for hoist for machines

V&T Technologies processing vfd motor control for hoist for machines

Delivery Time
With 20 days after deposit
Port of loading
Shenzhen,Shanghai
Sample provide
yes
Sample free
yes
Sample freight payer
buyer
Term of payment
T/T,L/C
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
V&T's ev motor controller is manufactured in strict accordance with relevant national standards. Every detail matters in the production. Strict cost control promotes the production of high-quality and priced-low product. Such a product is up to customers' needs for a highly cost-effective product.Compared with similar products, V&T's ev motor controller is more advantageous in the following aspects.
Product Details
V&T pays great attention to product quality and strives for perfection in every detail of products. This enables us to create fine products.Closely following the market trend, V&T uses advanced production equipment and manufacturing technology to produce servo drive. The product receives favors from the majority of customers for the high quality and favorable price.
Company Advantages
1. V&T Technologies vfd motor control is available in diverse attractive design styles.
2. This product has good thermal stability. It is not easily prone to color fading or performance changes in high-temperature environments.
3. As the leading vfd motor control manufacture, V&T Technologies is specialized in producing high quality products.
4. With the support of variable ac drive , vfd motor control has attracted more customers with its high quality.

Representative Industry

Gantry Stone Saw, Rope Saw and so on

  • wide input voltage range: When the inverter is fully loaded, the input voltage range is 320 ~ 480V.

  • strong anti-interference capability: Multiple inverter are installed in the same electric control cabinet with non-interference at strictly international EMC standard design.

  • Strong environment adaptiveness: The environment of stone processing is very bad with two much dust on site ,and it is easy to be not good heat dissipation or fan blocked.

  • Excellent vector control: Strong torque under low frequency, high stability and precision, greatly meet the needs of the stone industry.


Product Overview


V&T Technologies processing vfd motor control for hoist for machines-1

Product Overview

V5-H-C8 series is a special inverter with high-performance vector control for the stone industry launched by Shenzhen V&T Technologies Co.,Ltd, which is widely used in equipment such as rope saws and frame saws.The product has the same excellent control performance with the international high-end inverter. At the same time, it is combined with the use characteristics of China, and it further strengthened the reliability and environmental adaptability of the product, as well as consider this field’s features and client’s requirements. This greatly meet the needs of various transmission applications in stone industry.


Model Explanation


V&T Technologies processing vfd motor control for hoist for machines-2


Product Catalogue


V5−H−4T□□□G−C8    3 Phase 400V Constant Torque/Heavy-duty Applications


Power(kW)

0.75

1.5

2.2

3.7

5.5

7.5

11

15

18.5

22

30

37

45

55

75

Motor(kW)

0.75

1.5

2.2

3.7

5.5

7.5

11

15

18.5

22

30

37

45

55

75

Output

Voltage(V)

3 phase 0~Rated Voltage

Rated Current(A)

2.5

3.8

5.5

9

13

17

24

30

39

45

60

75

91

112

150

Overload capacity

150%  1min,180%  10 second, 200%  0.5 second,interval: 10 minutes (inverse time lag feature)

Input

Voltage/ frequency

3 phase 380V~480V;50Hz/60Hz

Allowable voltage range

323V~528V;Voltage imbalance:≤3% ;allowable frequency fluctuation:±5%

Rated Current(A)

3.5

6.2

9.2

14.9

21.5

27.9

39

50.3

60

69.3

86

104

124

150

201

Braking unit

Built-in as standard

Built-in as optional

IP

IP20

Cooling mode

Natural air cooling

Forced air cooling



Installation Dimension


Product appearance, installation dimensions, approximate weight


V&T Technologies processing vfd motor control for hoist for machines-3
V&T Technologies processing vfd motor control for hoist for machines-4

V5−H−4T7.5G−C8 and lower power grade



V&T Technologies processing vfd motor control for hoist for machines-5
V&T Technologies processing vfd motor control for hoist for machines-6

V5-H-4T11G−C8 and higher power grade



Product appearance, installation dimensions, approximate weight


Voltage

Model

Appearance, Installation Dimensions(mm)

Weight (kg)

W

H

D

W1

H1

D1

T1

Hole d

400V

V5−H−4T0.75G−C8

118

190

155

105

173

40.8

3

5.5

1.5

V5−H−4T1.5G−C8

118

190

175

105

173

60.5

4

5.5

2.6

V5−H−4T2.2G−C8

V5−H−4T3.7G−C8

V5−H−4T5.5G−C8

155

249

185

136

232

69

8

5.5

4.5

V5−H−4T7.5G−C8

V5−H−4T11G−C8

210

337

200

150

324

88

2

7

8.5

V5−H−4T15G−C8

V5−H−4T18.5G−C8

289

440

215

200

425

88

2.5

7

17

V5−H−4T22G−C8

V5−H−4T30G−C8

V5−H−4T37G−C8

319

575

212

220

553

90.5

2.5

10

25

V5−H−4T45G−C8

V5−H−4T55G−C8

404

615

250

270

590

86.5

3.0

10

35

V5−H−4T75G−C8


The following two points should be kept in mind when applying stone processing inverters:


(1) Use environment. Inverter has higher requirements for ambient temperature, and it is also a device with large heat generation. When using high-power inverters in stone processing, when considering cooling, we must consider the heat of the inverter. Generally, according to the capacity of the inverter, 3 to 4% of the power is calculated by the calorific value of the inverter. . The rated capacity of the inverter in the stone processing industry is marked for a certain use environment. The inverter's operating temperature is generally required to be 0 ° C to 55 ° C, preferably controlled below 40 ° C, and the relative humidity should be controlled to 20% to 90%. .




       The rated current of the inverter in the stone processing industry is based on a certain altitude, rated voltage, and rated carrier frequency. If it exceeds the regulations, it will cause the inverter to be derated. In the selection of inverter for stone processing, the capacity should be modified as follows: when the altitude is higher than 1Km, the inverter rated current should be reduced by about 6% for each additional 1Km; when the input voltage is increased by 2%, the inverter rated current It should be corrected downward by 4%. When the carrier frequency is higher than the rated carrier frequency, the rated current should be corrected accordingly.


(2) External configuration of inverter for stone processing industry. In order to prevent operating overvoltage, it is not suitable to install a contactor between the inverter and the motor. If there is no fast fuse before the internal rectifier circuit of the inverter, a fast fuse that meets the requirements should be externally installed between the inverter and the power supply. An air circuit breaker cannot be used. Instead of fuse



Company Features
1. Shenzhen V&T Technologies Co.Ltd. is a name that reflects the high quality. By providing variable ac drive , we have earned a reputation of reliable problem-solving.
2. Shenzhen V&T Technologies Co.Ltd. has reached high technology level in the field of vfd motor control .
3. Committed to dealing with market change is one of our surviving factors in the fierce competition. We have a dynamic organization that is always well-prepared to meet any challenges in the industry and acts flexibly to come up with solutions. We have excellent teams. They are the units of our company to produce goods and provide services. They provide a great deal of knowledge, judgment, and expertise to meet product needs. In the enterprising spirit of 'Pursuit of Excellence', our company strives to develop in a rapid and steady way. By deepening communication, we will work hard to assist customers to design, develop, and manufacture the accurate products they need. We actively respond to environmental issues. We will work closely with other governmental departments to minimize the negative impact or damage to the environment. For instance, we accept the authorities' inspection for waste handling.
The raw materials used for V&T Technologies vfd motor control are non-toxic, non-allergenic, and non-carcinogenic. And they have been sterilized in the manufacturing process. The product is highly resistant to abrasion
V&T Technologies vfd motor control is designed in a professional manner. The contour, proportions and decorative details are considered by both furniture designers and draftsmen who are both experts in this field. The solid wood materials ensure its long lifespan
The quality of V&T Technologies vfd motor control will be authenticated using professional inspection approaches, including visual inspection, non-destructive inspection, and metallographic examination. The product features an antique French style
V&T Technologies vfd motor control has gone through a series of production processes. They involve CAD/CAM design, prototyping, milling, turning, welding, painting, and commissioning. It can be made of oak, beechwood, elm, maple, etc
V&T Technologies vfd motor control has undergone rigorous testing. This test was conducted by our QC team who performed tensile testing, fatigue testing and color fastness testing. The product is versatile, compatible with spaces featuring classic, rustic, and retro styles
This brand of variable ac drive is of high performance for the add of the vfd motor control. The moisture content in its materials has been treated to a low level, which makes it unlikely to swell under the humid condition
Being high quality and cost competitive, variable ac drive of V&T Technologies will surely become a highly marketable commodity. The product can be colored and refinished for renovation
The principle of vfd motor control of vfd motor control is proposed for Shenzhen V&T Technologies Co.Ltd. to select materials. The product is not prone to warp or crack under temperature changes
That V&T Technologies is unique in the variable ac drive market is the design of vfd motor control. Its oak wood material provides innate stability and reliability
Compared with normal variable ac drive, variable ac drive possess the combination of excellent performance and long service life. This product has a sturdy structure, which makes it resistant to wobble
vfd motor control is pretty popular among vfd motor control, and it possesses characteristic such as vfd motor control. The solid wood materials ensure its long lifespan
Shenzhen V&T Technologies Co.Ltd. knows that only quality can win us more customers like you that pays attention to it. Its size, shape, and finish can be customized
Shenzhen V&T Technologies Co.Ltd. has advanced production technology and perfect quality control system. This product is handcrafted with meticulous care and high quality
For the further business expansion, Shenzhen V&T Technologies Co.Ltd. has established a strong sales network. Unlike products made of other materials, this product features a natural look and a unique wooden texture
Innovation is the Gene of Shenzhen V&T Technologies Co.Ltd.. It can be waxed, polished, and oiled to achieve a glossy appearance
V&T Technologies has been putting emphasis on the quality of service. The product has been thoroughly dried and is not likely to go mouldy
Shenzhen V&T Technologies Co.Ltd. will continue to provide the best customer service. Its size, shape, and finish can be customized
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...