Stepping motors are divided into two-phase stepping motors and three-phase stepping motors

by:V&T Technologies     2020-01-17
Stepping motors are divided into two-phase stepping motors and three-phase stepping motors, for example: two-phase stepping motors: F-57- H56, where F means Hybrid Stepping Motor, 57 means Motor base number, H56 means fuselage length, for example: Three-phase stepping motor, FHB--3--11-- 18 among them, FHB represents Hybrid Stepping Motor, 3 represents 3 phases, 11 represents motor frame number, and 18 represents fuselage length. Stepper motor driver, E. G. FBQ--3--06-- 4D, where FBQ represents the hybrid stepping motor driver, 3 represents three phases, 2 represents two phases, and 06 represents the maximum output current of the driver 【A 】, 4D indicates the maximum input voltage of the driver 【X10V] , With D as DC input, A as AC input and DA as AC/DC. Attention to motor installation: 1. The motor should be installed in a place with little dust, no corrosive gas and flammable gas, and the electric conductor such as metal dust should be avoided to prevent oil and water from entering the shell. Avoid places with strong vibration. 2. All signal lines adopt variable intersection line or shielded line, and the output phase line core load surface S> 1㎡, the input and output signal lines should be separated from the power lines of the motor lines, because noise sources close to high-voltage power supplies, electromagnetic switches, high-frequency power supplies and other noise sources are the causes of misoperation. 3. Keep at least 4 cm between drivers and other equipment for ventilation. 4. When the motor needs to rotate at high speed, it must be lifted and lowered. Poor handling of the frequency curve is often the main reason why the motor cannot go up at high speed. The temperature rise of the motor varies according to the voltage, motor speed and drive load. Usually, when running at high speed for a long time, the motor is prone to heat. Please keep the temperature of the motor not exceeding 100 degrees. If the driving power supply fails, you can contact the company directly and guarantee it within one year. After disassembly and assembly, the company will not be responsible. Please understand. Precautions at the END of the year at least 4 cm between drivers and other equipment for ventilation. When the motor needs to rotate at high speed, it must be lifted and lowered. Poor handling of the frequency curve is often the main reason why the motor cannot go up at high speed. The machine should be installed in a place with little dust, no corrosive gas and flammable gas. Electric conductors such as metal dust should be avoided, and oil and water should be prevented from entering the shell. Avoid places with strong vibration. TAG three-phase stepping motor
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...