Stepping Motor and stepping motor driver should pay attention to ventilation
Stepping Motor and stepping motor driver should pay attention to ventilation. As far as the operation and function of stepping motor are concerned, it is finally realized through the mutual cooperation of various structures, that is to say, problems in any structural part of the motor will affect its operation and function, especially problems in key structural parts such as drivers, which will directly lead to the normal use of the motor.
Therefore, when using the motor, everyone is required to pay attention to the protection of its various structures, especially to ensure good ventilation of the driver.
Because only when the stepper motor is used, the ventilation of the driver is guaranteed to be good, so that the driver can be ensured during continuous operation, not because the air is too blocked and the heat cannot be dissipated, there is an obvious warming phenomenon.
Otherwise, if the ventilation condition of the drive is not good, it will show poor operation effect in the long-term use of electricity and under the condition that the drive heats up too high, in serious cases, the motor may even be burned down due to the high temperature of the driver part.
In other words, when using the stepping motor, everyone needs to ensure that the driver is well ventilated and avoid the phenomenon of excessive temperature rise in this part, so as to ensure the service life of the motor, only in this way can the probability of motor failure be reduced.
For more knowledge of linear stepping motor parameters, please consult ruite electromechanical TAG.