Stepping Motor reducer leaks oil. Stepping motor reducer is widely used and belongs to indispensable power equipment for mechanical equipment, especially in printing machinery, corrugated machinery, packaging machinery, conveying machinery, food machinery, color box machinery, automatic storage, three-dimensional warehouse, three-dimensional parking equipment, textile, dyeing and finishing, chemical and other equipment.
As an important transmission equipment in the enterprise equipment system, the common oil leakage problem of stepping motor reducer will have a great impact on the Enterprise site management and safe production. Therefore, finding an effective way to reduce the oil leakage of stepping motor reducer has become an important problem in the industry.
Stepping Motor reducer Shenzhen ruite motor believes that the reasons for oil leakage of stepping motor reducer are as follows :(1)
If the amount of oil is increased too much, the oil pool will be stirred very badly during the operation of the stepping motor reducer, and the lubricating oil will splash everywhere in the machine. If the amount of oil is too much, A large amount of lubricating oil is accumulated in the shaft seal, joint surface, etc. , resulting in leakage. (2)
The pressure in the oil tank of the stepping motor reducer rises, and in the closed stepping motor reducer, each pair of gears will generate heat when friction occurs in meshing. According to Boyle maliot's law, with the lengthening of the running time, the temperature in the reducer box is gradually increased, while the volume in the reducer box is unchanged, so the pressure in the box is increased, and the lubricating oil in the box is splashed and sprinkled on the inner wall of the stepping motor reducer box.
Due to the strong permeability of the oil, under the pressure in the box, the oil will seep out from where the seal is lax. (3)
Improper maintenance process, during equipment maintenance, oil leakage will also be caused due to incomplete removal of dirt on the joint surface, improper selection of sealant, reverse installation of sealing parts, and failure to replace sealing parts in time. (4)
The unreasonable structural design of the stepping motor reducer causes oil leakage. For example, the designed stepping motor reducer does not have a ventilation cover, and the stepping motor reducer cannot realize pressure equalization, resulting in higher and higher pressure in the box and oil leakage.
At present, the technical effect of Solei polymer repair materials used in European and American countries is still very good, and the repair of oil leakage is more time-saving, labor-saving, effective and high in sexual intercourse ratio.
The Suo lei polymer material has excellent adhesion, oil resistance and 350% tensile strength, overcomes the influence caused by the vibration of the reducer, and solves the problems that cannot be solved for many years for the enterprise, saving time and labor, the effect is immediate.
Related reading: What are the components of stepping motor control system for stepping motor application? TAG stepping motor reducer leaks oil