Home  >  Top Products Manufacturer  >  Customized EV Motor Controller Company  > 

MCU+ Auxiliary Drive 4-in-1 Auxiliary motor controller (Oil pump + Air pump +DC/DC+PDU)

MCU+ Auxiliary Drive 4-in-1 Auxiliary motor controller (Oil pump + Air pump +DC/DC+PDU)

MCU+ Auxiliary Drive 4-in-1 Auxiliary motor controller (Oil pump + Air pump +DC/DC+PDU)
  • MCU+ Auxiliary Drive 4-in-1 Auxiliary motor controller (Oil pump + Air pump +DC/DC+PDU)
  • MCU+ Auxiliary Drive 4-in-1 Auxiliary motor controller (Oil pump + Air pump +DC/DC+PDU)
  • MCU+ Auxiliary Drive 4-in-1 Auxiliary motor controller (Oil pump + Air pump +DC/DC+PDU)
  • MCU+ Auxiliary Drive 4-in-1 Auxiliary motor controller (Oil pump + Air pump +DC/DC+PDU)
  • MCU+ Auxiliary Drive 4-in-1 Auxiliary motor controller (Oil pump + Air pump +DC/DC+PDU)

MCU+ Auxiliary Drive 4-in-1 Auxiliary motor controller (Oil pump + Air pump +DC/DC+PDU)

Delivery Time
With 20 days after deposit
Port of loading
Shenzhen , Shanghai
Sample provide
yes
Sample free
yes
Sample freight payer
buyer
Term of payment
T/T,L/C
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
servo drive developed and produced by V&T is widely used. The following are several application scenes presented for you.V&T always adheres to the service concept to meet customers' needs. We are committed to providing customers with one-stop solutions that are timely, efficient and economical.
Company Advantages
1. The production of V&T Technologies electric vehicle motor controller design adopts standardized production technology.
2. electric motor controller is considered as the most promising electric vehicle motor controller design because of its motor controller .
3. electric motor controller created by [公司名称 has the characteristics of electric vehicle motor controller design .
4. Shenzhen V&T Technologies Co.Ltd. has perfect quality assurance system and production guarantee system for electric motor controller .
5. We will make continuous efforts in expanding market application of the product.

V6-H-4D110G  MCU Motor Controller


Auxiliary Drive


Technical Parameter


V6-H-4D110G  MCU Motor Controller

Adaptable motor type

Permanent magnet synchronous motor、Three phase asynchronous motor

Applicable vehicle type

Medium Bus, Logistics Vehicle, Passenger Car

Product type

V6-H-4D110G

Rated input voltage

DC 540V

Rated power

110kW

Input voltage range

DC 350V~750V

Rated output current

210A

Maximum output current

350A

Output frequency range

0~1000Hz

Protection level

IP67

Cooling type

Water cooling

Outline dimension

410*314*118mm、336*314*118mm

Weight

9.5kg、8.5kg



V6-H-4D5.5G & V6-H-4D5.5G  Four-in-one Auxiliary Controller (Oil pump + Air pump +DC/DC+PDU)

Adaptable motor type

Permanent magnet synchronous motor、Three phase asynchronous motor

Applicable vehicle type

Medium Bus、Large Bus、Logistics Vehicle

Product type

V6-H-4D5.5G & V6-H-4D5.5G

Rated input voltage

DC 540V

Rated power

5.5kW & 5.5kW & 3kW

Input voltage range

DC  350V~750V

Rated output current

13A & 13A , DC  27.5V/110A

Maximum output current

19.5A & 19.5A , DC 130A

Output frequency range

0~300Hz

Protection level

IP67

Cooling type

Water cooling

Outline dimension

609*473*188(mm)

Weight

35kg


Outline Dimension


V6-H-4D110G  MCU Motor Controller


V6-H-4D5.5G & V6-H-4D5.5G  Four-in-one Auxiliary Controller (Oil pump + Air pump +DC/DC+PDU)



Company Features
1. Shenzhen V&T Technologies Co.Ltd. is a China-based company that has been specializing in the design and manufacture of electric vehicle motor controller design . We have achieved a reputation for quality, service and competitive pricing.
2. A number of patents were obtained by Shenzhen V&T Technologies Co.Ltd. during the development of electric motor controller .
3. V&T Technologies will be committed to innovation of 24v dc motor controller and management philosophy. Please contact. The enterprise culture that V&T Technologies sticks to turns out to be important for the qualified service provided by our staff. Please contact. V&T Technologies has a big goal of becoming a famous brand in the motor controller market. Please contact. V&T Technologies always takes the quality and service as guarantee. Please contact.

DC Motor Controller for Golf Carts

Specifications:

  • PWM operating frequency: 16 kHz
  • Electrical isolation to heatsink (min.): 500 VAC
  • KSI input voltage (minimum): 16.8 V
  • KSI input current (typical): 80 mA without programmer; 120 mA with programmer
  • Ambient operating temperature range: -40°C to 50°C
  • Heatsink overtemperature cutback: starts at 85°C; cutoff at 95°C
  • Heatsink undertemperature cutback: 50% armature current at -25°C
  • Package environmental rating: IP53

Overview:

The Curtis PMC 1297 motor controller is an integrated controller that combines two motor controllers in one: it controls both a separately-excited traction motor and a series pump motor. Typical applications include walkie/rider pallet trucks, low lifts, stackers, small order-pickers, small reach trucks, and other small industrial vehicles.

The 1297 controller offers smooth, silent, cost effective control of motor speed and torque. The traction section includes a full-bridge field control and a half-bridge armature control to provide full solid-state regenerative braking. The pump section contains a half-bridge drive designed to provide smooth and efficient control of a series pump motor. In addition to controlling the pump motor, the 1297 controls the valves on the Lift cylinder’s hydraulic line and thus controls the hydraulic path for Lift and Lower operations.

The 1297 controller is fully programmable through any of Curtis PMC’s 1313-4401 Handheld Programmer or 1314 PC Programming Station. In addition to configuration flexibility, the programmer provides diagnostic and test capability.

Key Features:

  • Curtis Model: 1297-2401
  • Norminal Battery Voltage (Volts): 48V (default setting) or 24V
  • Amature 2 minute current rating (amps): 350
  • Field 2 minute current rating (amps): 35
  • Logic enable and logic power input voltage (minimum): 16.8 V
  • Logic enable and logic power input current (no contactors engaged): 80 mA without programmer; 120 mA with programmer
  • Logic input voltage: >7.5 V High; <1 V Low
  • Logic input current: 7.3 mA (nominal)
  • Throttle control signals: 2-wire 5kΩ–0 or 0–5kΩ; 3-wire pot; or 0–5V
  • Dimensions: L158xW158xH84 mm
  • Net Weight: 3.0 kg

Features Include:

  • 350 amp separately excited regenerative traction motor controller
  • Field current standard at 35 amps on 350 amp controllers
  • MultiMode™ feature allows two distinct user-selectable operation modes
  • 300 amp series pump motor controller, with choice of variable PWM or ramped on/off
  • Proportional lowering valve is controlled by a variable-current driver, for precise control during lowering
  • Lift and Lower operations start smoothly, because of hydraulic system pre-load function
  • Throttle inputs for single-ended or wigwag 5kΩ pots or 0–5V throttles (both standard full stroke and restricted range); one throttle for the traction system and one for the hydraulic system
  • Active precharge of controller capacitor bank extends life of main contactor tips
  • Complete diagnostics through Curtis 1313-4401 Handheld Programmer or 1314 PC Programming Station and through the built-in Status LED, for quick and easy testing, diagnostics, and parameter adjustment
  • Three hourmeters—total KSI-on hours, drive hours, pump hours—and their associated maintenance timers are built into the controller, with EEPROM storage (no battery)
  • BDI calculations performed within controller
  • Meets EEC fault detection requirements (standard M- PWM fault check)
  • Fault detection circuitry on throttle inputs can be used to inhibit operation if traction or hydraulic throttle signal goes out of range for any reason
  • Internal reverse polarity protection (no external diode required)
  • Continuous diagnostics during operation, with microprocessor power-on self-test
  • All output drivers are short-circuit protected and provide built-in coil spike protection
  • Positive battery connections for all inputs
  • Fully protected inputs
  • Internal and external watchdog circuits ensure proper software operation
  • High environmental protection rating (IP53)

 

Package and Shipping 

Package:Normally we use the standard exporting packaging. We also can according to clients' request .

 

Shipping :

 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.

2. By Air: Delivery from the Shanghai airport to customer’s destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

About Us       

Hefei Huanxin Technology Development  Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We have achieved great improvement since our company was founded in 2004. 

We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support. 

Contact Details                                                                      

 

Please freely contact us if you get any problem.

 

Mr Jason Yu

Skype: yu.jason61

Mobile: +86 15256530726

Tel: +86 551 66338878

Fax: +86 551 66338870


Product Description
Product Name
Curtis Controller
Model Number
1243-4220
Voltage
24-36V
Current
300A
Applied Model
Electric vehicle

Electric Motor Conversion Kit DC Brush Controller For Electric Car 1243-4220

Curtis 1243 Generation 2 MultiMode™ controllers are separately excited motor speed controllers designed for use in a variety of small industrial vehicles and in material handling equipment. These programmable controllers are simple to install, efficient, and cost effective, while offering more features than the original 1243.

The 1243GEN2 MultiMode™ controller provides smooth precise control of motor speed and torque. A full-bridge field control stage is combined with a half-bridge armature power stage to provide solid state motor reversing and full regenerative braking without additional relays or contactors. The controller's rugged IP53 housing and packaging are built to withstand shock and vibration. State-of-the-art surface mount logic board fabrication makes the 1243GEN2 controller even more reliable than the original 1243. The 1243GEN2 is fully programmable through the Curtis Model 1313-4401 Handhold Programmer. In addition to configuration flexibility, the programmer provides diagnostic and test capability.
PWM operating frequency: 16 kHz

Electrical isolation to heatsink (min.): 500 VAC
.KSI input voltage (minimum): 16.8 V
.KSI input current (typical):Logic input voltage: 7.5 V High; <1 V Low
78 mA without programmer
120 mA with programmer
Logic input current 15 mA
Ambient operating temperature range: -40°C to 50°C
Heatsink overtemperature cutback: 85°C
Heatsink undertemperature cutback: -25°C
Package environmental rating: IP53

Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...