The maintenance method of deceleration stepping motor and the maintenance method of deceleration stepping motor, I believe many friends know that deceleration stepping motor will generate a lot of vibration and noise after being used for a long time, this naturally shows that some parts inside are broken, so it needs to be repaired and replaced. Let's follow the small editor to see how to repair the deceleration stepping motor.
First of all, we have to see if the bearing hole of the reducer is worn out, causing the thread to fail, there is also gear wear, so the gear wear mainly includes the wear of the lower tooth surface, the broken gear shaft hole of the gear tooth or the wear of the keyway, etc. There is a wear of the keyway on the shaft surface of the speed reducer and the bending of the shaft, etc.
If the above problems occur, we still suggest that we can take the repair method of on-site repair and direct replacement of parts, and there is wear on the surface of the shaft surface, such as the shaft hole keyway, etc, we can completely adopt the method of electroplating, so as to restore the accuracy of the original parts, and we can also adopt the method of straightening the press to deal with the bending of the shaft, there is no other way to repair the damaged gear teeth, only by reprocessing new parts to replace them, in fact, these are just the ways to remedy the problem. If you want to ensure the service life of the stepping reducer, the main key point is that it is very important to choose the right type when you buy it, there is also a high safety factor, while strictly following the instructions to operate, etc. , at the same time to ensure lubrication, so as to avoid overload, if there is an abnormality in the operation of the speed reducer, it is necessary to check it early so that it can be used earlier after troubleshooting, without affecting the work.
For more questions about stepping motor, brushless motor, stepping driver, brushless driver, stepping motor driver and brushless motor driver, please visit the official website of Shenzhen ruite electromechanical Technology Co. , Ltd for consultation.
TAG deceleration stepping motor